Electronic Navigation Industries A-500 Amplificador
Fabricante:
No hay fotos disponibles!
Tal vez puedas subir por foto para el
Electronic Navigation Industries A-500 ?
Si tienes otros manuales para el
Electronic Navigation Industries A-500 puedes subir los archivos aquí .
Modelo:
A-500
Fecha:
1997
Categoría:
Grupo:
Descripción:
Power Amplifier
Información
The ENI Model A500 is an all solid state Amplifier which has
a flat frequency response from .3 mHz to 35 mHz. It provides
500 watts of linear power with low harmonic and
Intermodulation distortion. Gain is 60 dB nominal, with a
variation of less than +1.0 dB over the entire frequency
range. Input and output impedance are 50 dims and the unit
may be driven to full power output by most RF synthesizers,
signal generators and swept signal sources.
The ENI Model A500 will deliver its rated power output into
any load impedance, regardless of match. Built-in protection
circuitry will absorb the power reflected from a mismatched
load without causing failure or oscillation.
Output RF voltage is displayed on the front panel meter. Its
integral Power Supply and cooling operate from a 230 VAC
50/60 Hz main supply.
The Model A500 will raise the power level of signal sources
and generators without requiring tuning or bandswitching.
The Class A linear circuitry will amplify signals of AM, FM,
SSB, TV and complex modulations limited only by their peak
input and bandwidth, with minimum distortion.
Type manuel:
Servicio y Manual del usuario
Páginas:
46
Tamaño:
1.39 Mbytes (1456035 Bytes)
Idioma:
english
Revisión:
C1
Manuel-ID:
A500-TM
Fecha:
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2016 01 25
MD5:
ab443f7f7daaa694dd46cbf94e2c34de
Descargas:
489