Wavetek 175 Generador
Fabricante:
Modelo:
175
Fecha:
1978
Categoría:
Grupo:
Descripción:
Arbitrary Waveform Generator

Información

THE MODEL 175 The model 175, Arbitrary Waveform Generator (Arb), generates any waveform that can be expressed as a function of time. The working Random Access Memory (RAM) has four sets of 256 addresses and each address accepts an 8 bit word. This corresponds to a 1024 (time) by 255 (amplitude) matrix in which to draw waveforms. These storage addresses can be manually loaded by front panel controls or remotely loaded via the GPIB Interface. The stored waveform, or any portion thereof, then can be generated at selectable clock rates and amplitudes. In addition to the four working Random Access Memories (RAMs), four optional Programmable Read Only Memories (PROMs) allow the same capacity for permanent waveform storage. Sine, triangle, square and ramp waveforms are always available. Operation can be continuous or triggered. Triggering can be for a preset number of cycles or the number of cycles triggered can be monitored and displayed. Start and stop addresses are selectable for partial waveform output. At low frequencies, point-to-point smoothing can be selected to minimize digital step size. Output may be held at any level, or amplitude and offset can be slowly ramped to zero when a ramp to zero command is given. Front panel operation is by keyboard and display which gives immediate verification of parameter and value in memory. The model 175 is fully compatible with the requirements of IEEE Standard 488-1975 for integration into a General Purpose Interface Bus (GPIB).

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
36
Tamaño:
1.96 Mbytes (2055640 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
1980 05 01
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2018 08 12
MD5:
1e8e5fb0727f5509c2ba60c26c1c5c20
Descargas:
484
Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
124
Tamaño:
16.04 Mbytes (16819475 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
1983 08 01
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2018 08 12
MD5:
b885d51e8263ab3bd94eb0037afade7b
Descargas:
677

Información

Instruction Manual SECTION 1 GENERAL DESCRIPTION 1.1 THE MODEL 175 ... 1-1 1.2 SPECIFICATIONS ... 1-1 1.2.1 Versatility ... 1-1 1.2.2 Timing Precision ... 1-2 1.2.3 Amplitude Precision ... 1-2 1.2.4 General ... 1-2 SECTION 2 INSTALLATION AND Interface 2.1 MECHANICAL INSTALLATION ... 2-1 2.2 ELECTRICAL INSTALLATION ... 2-1 2.2.1 Power Connection ... 2-1 2.2.2 Signal Connections ... 2-1 2.2.3 General Purpose Instrument Bus (GPIB) Connections ... 2-2 2.2.4 GPIB Address ... 2-2 2.2.5 Initial Checkout and Operation Verification ... 2-3 2.2.6 Permanent Custom Waveforms ... 2-3 SECTION 3 OPERATION 3.1 GENERAL ... 3-1 3.2 KEYBOARD ... 3-6 3.2.1 Notes ... ... 3-6 3.2.2 Key Descriptions ... 3-6 3.3 POWER ... 3-9 3.4 INPUTS AND OUTPUTS ... 3-9 3.5 BASIC COMMAND STRUCTURE ... 3-10 3.6 COUNTER GENERATED WAVEFORMS ... 3-12 3.7 MEMORY DATA (Y) FOR ARBITRARY WAVEFORMS ... 3-12 3.8 SMOOTHING (O) ... 3-12 3.9 SAMPLE TIME (T)AND WAVEFORM SMOOTHING ... 3-13 3.10 CLOCK TIME UNITS (S) ... 3-13 3.11 FULL OR PARTIAL BLOCK (U) ... 3-13 3.12 BLOCK RATE (F) ... 3-14 3.13 AMPLITUDE (A) AND OFFSET (D) ... 3-14 3.14 ERRORS ... 3-15 3.15 PRESET AND MONITOR TRIGGER (M) ... 3-16 3.16 GPIB ... 3-16 3.16.1 Bus Lines Defined ... 3-16 3.16.2 GPIB Commands ... 3-17 3.16.3 GPIB Data Transfers ... 3-18 3.16.4 GPIB Talk Message and Terminator Character (R) ... 3-18 3.16.5 GPIB Service Request Enable (Q) ... 3-19 3.17 INPUT AND OUTPUT IMPEDANCES ... 3-20 3.17.1 Arbitrary Waveform Outputs ... 3-20 3.17.2 TTL Outputs ... 3-20 3.17.3 TTL Inputs ... 3-20 3.17.4 Changing Source Impedance of the Main Output ... 3-20 SECTION 4 CALIBRATION 4.1 INTRODUCTION ... 4-1 4.2 TEST EQUIPMENT ... 4-1 SECTION 5 CIRCUIT DESCRIPTION 5.1 BOARD FUNCTIONS AND CONNECTIONS ... 5-1 5.2 GENERATOR ... 5-1 5.2.1 General ... ... 5-1 5.2.2 Generator Circuits ... 5-3 5.3 DISPLAY AND KEYBOARD ... 5-15 5.3.1 Display ... 5-15 5.3.2 Keyboard ... 5-17 5.4 MICROPROCESSOR ... ... 5-17 5.5 MICROPROCESSOR/GPIB INTERFACE ... 5-23 5.5.1 Data Ready ... 5-23 5.5.2 GPIB Busy ... 5-23 5.5.3 End ... 5-23 5.5.4 Remote ... 5-23 5.5.5 Talk ... 5-23 5.5.6 Listen ... 5-24 5.5.7 Service Request ... 5-24 SECTION 6 TROUBLESHOOTING 6.1 INTRODUCTION ... 6-1 6.2 POWER SUPPLY ... 6-1 6.3 FRONT PANEL DISPLAY ... 6-2 6.4 MICROPROCESSOR ... 6-4 6.5 GPIB INTERFACE ... 6-6 6.5.1 Test 1 — Bus Hung Up ... 6-6 6.5.2 Test 2 — Handshake ... ... 6-9 6.5.3 Test 3 — Listen Mode ... 6-10 6.5.4 Test 4 —Talk Address ... 6-11 6.5.5 Test 5 — Talk Mode ... 6-11 6.6 GENERATOR ... 6-12 SECTION 7 PARTS AND SCHEMATICS 7.1 DRAWINGS ... 7-1 7.2 ORDERING PARTS ... 7-1 7.3 ADDENDA ... 7-1 APPENDIX APPENDIX A American Standard Code for Information Interchange (ASCII) ... A-1 APPENDIX B Programming Examples ... B-1 APPENDIX C Permanent Custom Waveforms ... C-1

ver más

Hoja de datos
Type manuel:
Hoja de datos
Páginas:
4
Tamaño:
458.97 Kbytes (469986 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2014 11 09
MD5:
df510104d6cc0f997037cc560e1d60c4
Descargas:
697