Johnson Viking Valiant Transmisor
Fabricante:
Modelo:
Viking Valiant
Fecha:
0
Categoría:
Grupo:
Descripción:

Información

This compact Transmitter gives you outstanding flexibility and performance , . . power to punch through terrific QRM! Built-in VFO or crystal controlled, the "Valiant" is completely bandswitching on all amateur bands J6G through 10 meters . . , delivers a full 275 watts input on CW and SS8 [with an auxiliary SSB exciter) and 200 watts on AM, VFO is temperature compensated and extremely stable — operates in the K75 to 2.0 me and 7.0 to 7.45 me ranges. The "Valiant" is designed with a high efficiency pi-network rank circuit which will match Antenna loads from 50 to 600 ohms and tune out large amounts of reactance — final tank coil is silver plated. Other features; complete TVI suppression; timed sequence (grid block) keying; high gain push-to-talk audio system for use with high impedance crystal or dynamic microphones; low level audio clipping; built-in low pass audio filter; self contained power supplies; and single control mode switching. As an exciter, the "Valiant" will drive any of the popular kilowatt level tubes and will provide a high quality speech driver system for . high powered modulators. A nine pin receptacle on the rear of the Transmitter brings put TVI filtered control and audio leads for exciter operation. This receptable permits the "Valiant" to be used as a Filament and plate power source, and also as a modulator for auxiliary equipment such as a VHF Transmitter.

ver más

Manual del usuario, Diagrama cirquit
Type manuel:
Manual del usuario, Diagrama cirquit
Páginas:
59
Tamaño:
6.01 Mbytes (6298901 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2014 02 16
MD5:
27d4abbdeadc039b92722f752a4e64bf
Descargas:
1504