LeCroy - HFP1000 - Sonda
Fabricante:
No hay imágenes disponibles!
Tal vez puedas
subir una foto
para el
LeCroy HFP1000 ?
Si dispone de otros manuales para el
LeCroy HFP1000
puede
subir los archivos aquí.
.
Equipamiento:
HFP1000
Fecha:
2008
Categoría:
Grupo:
Subgrupo:
Información
PRODUCT DESCRIPTION
The 1 GHz HFP1000 is a small, high frequency active Probe designed to meet today’s increasing
demand for measurements on a variety of test points.
With low input capacitance and high input resistance, circuit loading is minimized.
The HFP1000 can be used with LeCroy’s WavePro TM Waverunner TM and LC Series Oscilloscope with firmware version 8.7.0 or higher.
When the Probe is used with any of these Oscilloscope an AutoColor ID feature automatically
illuminates the Probe head in the default trace color of the channel to which the Probe is connected,
eliminating the need for color bands or other markers.
With the ProBus Interface the HFP1000 becomes an integral part of the Oscilloscope The Probe can be controlled from the oscilloscope’s front panel. The Oscilloscope provides power to the Probe o there is no need for a separate Power Supply or batteries.
When used in combination with an ADPPS Power Supply the HFP1000 Probe can be used with
non LeCroy instruments. (See Section 4 for detailed operation with an ADPPS adapter).
Note:
The AutoColor ID feature will be disabled when the Probe is used with an ADPPS
adapter or a LeCroy Oscilloscope with firmware version lower than 8.7.0.
KEY BENEFITS
• High frequency performance
• Low input capacitance
• Wide dynamic range
• ProBus Interface • AutoColor feature matches the Probe color to the oscilloscope’s default trace color
• Five interchangeable tips for probing a variety of test points (two standard, three
optional accessories)
• Replaceable Probe tip socket
• Hands free probing with optional FreeHand Probe Holder
1 Manual
Manual del usuario
Tipo manual:
Manual del usuario
Páginas:
46
Tamaño:
1,3 MB
Idioma:
ingles
Revisión:
F
Manual-ID:
HFP1000-OM-E
Fecha:
febrero 2008
Calidad:
Documento electrónico, sin escaneo, muy bien legible.
Fecha de carga:
7 de enero de 2021
MD5:
60109215-6d8e-c653-8c46-86a83f4075c4
Información
Safety Information
Operator Safety ...1–1
Conventions Used in this Manual ...1–1
Overview
Product Description ...2–1
Key Benefits ...2–1
Standard Accessories 2–2
Optional Accessories 2–2
Features and Accessories Probe Head ...3–1
AutoColor ID ...3–1
Description of Standard and Optional Accessories 3–1
A. Tips ...3–2
B. Clips...3–3
C. Leads...3–4
D Probe Holder ...3–5
E. Cartridges ...3–6
Operation
Handling the Probe 4–1
Connecting the Probe to the Test Instrument ...4–1
Connecting the Probe to the Test Circuit ...4–1
Operation with a LeCroy Oscilloscope 4–1
Use with Non LeCroy Instruments ...4–2
Use with Older LeCroy Instruments ...4–2
High Frequency Measurements
Input Loading ...5–1
Inductive Loading (Lead Length) ...5–1
Capacitive Loading ...5–3
Care and Maintenance
Cleaning ...6–1
Calibration Interval ...6–1
Service Strategy ...6–1
Returning a Defective Probe 6–1
Replacement Parts ...6–2
Performance Verification
Test Equipment Required ...7–1
Preliminary Procedure ...7–2
Functional Check ...7–3
Procedure ...7–4
A. Output Zero Voltage ...7–4
B. LF Attenuation Accuracy ...7–5
Adjustment Procedure
Introduction ...8–1
Test Equipment Required ...8–1
Preliminary Procedure ...8–2
Procedure ...8–3
A. Adjust Output Zero ...8–3
B. Verify Calibration ...8–4
Specifications
Nominal Characteristics ...9–1
Warranted Characteristics ...9–1
Typical Characteristics ...9–1
Environmental Characteristics ...9–2
Physical Characteristics ...9–2
Compliance and Certifications ...9–4
Appendix A
Performance Verification Test Record ... A–1
Equipment Used: ... A–1 HFP1000 Test Record ... A–2
Descargas:
238
Descargas del mes pasado:
1
Descargar
lecroy--hfp1000--user--ID13584.pdf