Wavetek 182 Generator
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Wavetek 182 you can upload the files here .
Model:
182
Date:
1979
Category:
Group:
Description:
Information
THE MODEL 182
Wavetek model 182 Two MHz Function Generator is a
precision source of sine, triangle and square waveforms plus
dc voltage. All are front panel variable from
0.002 Hz to 2 MHz and can be externally modulated or swept
over a 1000:1 range. Output can be continuous or the
Generator can be triggered or gated by an external signal or
a front panel switch. Amplitude of the waveforms is variable
from 10V peak-to-peak into 500 down to 30 mV p-p. DC
reference of the waveforms can be offset positively or
negatively.
The main waveform output is 20V peak-to-peak maximum and can
be varied over a 30 dB range. A second waveform at 2V
peak-to-peak maximum {20 dB attenuation) and a TTL level
square at Generator frequency are auxiliary outputs, inputs
are provided for external voltage controlled Generator
frequency (VCG) and for triggering and gating the Generator.
Manual type:
Service and User Manual
Pages:
33
Size:
1.39 Mbytes (1462724 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
01 June 1979
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
12 August 2018
MD5:
da542a1b60769eea2490cb46f4f0fe43
Downloads:
322
Information
SECTION 1 GENERAL DESCRIPTION
1.1 THE MODEL
182 ... 1-1
1.2
SPECIFICATIONS ... 1-1
1.2.1
Versatiiity ... 1-1
1.2.2 Frequency
Precision ... 1-1
1.2.3 Amplitude
Precision ... 1-1
1.2.4 Waveform
Characteristics ... 1-2
1.2.5
General ... 1-2
SECTION 2 INSTALLATION
2.1 MECHANICAL
INSTALLATION ... 2-1
2.2 ELECTRICAL INSTALLATION ... , 2-1
2.2.1 Power
Connection ... 2-1
2.2.2 Signal Connections ...
... 2-1
2.3 ELECTRICAL ACCEPTANCE
CHECK ... 2-1
2.4 CHANGING THE OUTPUT
IMPEDANCE ... 2-2
SECTION 3 OPERATION
3.1 CONTROLS AND
CONNECTIONS ... 3-1
3.2
OPERATION ... 3-2
3.2.1 Signal Termination ...
... 3-2
3.2.2 Manual Function Generator Operation ...
... 3-2
3.2.3 Voltage Controlled Function Generator
Operation ... 3-2
3.2.4
Waveforms ... 3-3
SECTION 4 CIRCUIT DESCRIPTION
4.1 FUNCTIONAL SLOCK DIAGRAM
ANALYSIS ... 4-1
SECTION 5 ALIGNMENT
5.1 FACTORY
REPAIR ... 5-1
5.2 REQUIRED TEST
EQUIPMENT ... 5-1
5.3 REMOVING Generator
COVERS ... 5-1
5.4
ALIGNMENT ... ; ... 5-1
SECTION 6 TROUBLESHOOTING
6.1 FACTORY REPAIR ...
... 6-1
6.2 TROUBLESHOOTING
TABLES ... 6-1
6.3 TROUBLESHOOTING INDIVIDUAL
COMPONENTS ... 6-1
6.3.1
Transistor ... 6-1
6.3.2
Diode ... 6-1
6.3.3 Operational
Amplifier ... 6-1
6.3.4 FET
Transistor ... 6-1
6.3.5
Capacitor ... 6-1
6.4 GENERAL
INSTRUCTIONS ... 6-2
SECTION 7 PARTS AND SCHEMATICS
7.1
DRAWINGS ... 7-1
7.2 ORDERING
PARTS ... 7-1
7.3
ADDENDA ... 7-1
Add Comment
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.
Comments