Tektronix P68XX Series Probe
No picture available!
Maybe you can upload a pic for the
Tektronix P68XX Series ?
If you have any other manuals for the
Tektronix P68XX Series you can upload the files here .
Logic Analyzer Probes
The P68xx Logic Analyzer
Probes connect a TLA7Axx Series Logic Analyzer
module to a target system. The P6810, P6860 and P6880 probes consists of
34 channels, while the P6864 Probe
consists of 17 channels. You can connect the P6810 Probe
to the target system through podlet holders or leadsets. In addition, a variety of leadsets, SMT KlipChips and adapters aid in your connection to the target system. The P6860 Probe
can be connected through the use of the compression land pattern or a Mictor connector using the Mictor-on-PCB to P6434 to Compression adapter. The P6880 Probe
is designed for connection to the compression land pattern only configured for differential signals. The P6880 is not compatible with either the Mictor-on-PCB to P6860 Probe
adapter or the Compression-on-PCB to P6434 Probe
adapter. The P6864 Probe
can be connected through the use of the compression land pattern. Note that the P6864 is designed to minimize the needed area on the circuit board for connections when using the 4X clocking mode in the logic Analyzer
Service and User Manual
1.37 Mbytes (1434471 Bytes)
Electronic document, no scan, very well readable.
28 September 2019
This document provides information on using and servicing the P68xx series