Slaughter Company 2503 Test Set
No picture available!
Maybe you can upload a photo for the
Slaughter Company 2503 ?
If you have any other manuals for the
Slaughter Company 2503 you can upload the files here .
Key Features and Benefits
1.No load setup of trip current and output voltage.
This provides the operator with an easy and safe way to set trip currents and output voltages since parameters are set without the high voltage activated.
2.Automatic storage of test program.
The instruments will power up with the parameters that were used during the last test to avoid operator set-up errors.
3.All parameters for the setups can be adjusted through a simple menu driven program.
The easy to follow setup screens ensure that the operator correctly sets up all test parameters.
4.Line and load regulation.
This system maintains the output voltage to within 1% from no load to full load and over the line voltage range to ensure that test results remain consistent and within safety agency requirements.
5.PLC remote inputs and outputs.
The standard 9 pin interfaces provide outputs for Pass, Fail, and Test in Process.
Inputs include Test, Reset and Interlock. This gives the user all the basic remotes required to configure the instrument through simple PLC relay control. (Note: Model 1305
has ONLY the TEST input and no outputs).
6.Output voltage fine adjustment.
To make the instruments usable in different types of applications, the operator can manually bring the voltage up or down in 10 volt increments by simply pressing the up and down arrow keys. This makes it very easy to adjust the output voltage even while the tester is in the dwell mode so you can analyze test results at different voltages. This will not affect the programmed test voltage. Subsequent tests will be at the programmed voltage.
7.Flashing high voltage indicator.
A flashing LED located to the right of the display clearly indicates when high voltage is active to provide maximum operator safety.
8.User selectable input voltage.
The instruments can be switched for either 115 or 230 volt input operation through an easy access rear panel mounted switch to allow it to be used in any country.
Service and User Manual
510.39 Kbytes (522643 Bytes)
29 October 2007
Electronic document, no scan, very well readable.
05 October 2019
INTRODUCTION ... 2
INSTALLATION AND SAFETY ... 2
SERVICE AND MAINTENANCE ... 9
GLOSSARY OF TERMS ... 11
SPECIFICATIONS ... 13
CONTROLS ... 17
QUICK START ... 21
SETUP ... 23
/ ... 26
FIELD INSTALLATION OF OPTIONS ... 29
OPERATION ... 30
/ ... 31
FOR MODEL 1305
, ... 33
FOR MODELS 2503
/ ... 34
OPTIONS ... 35
CALIBRATION PROCEDURE ... 36