Orban OPTIMOD-FM 2200 Effect Processor
No picture available!
Maybe you can upload a photo for the
Orban OPTIMOD-FM 2200 ?
Digital Audio Processor
Orban’s OPTIMOD-FM 2200
DIGITAL Audio Processor is a
complete audio processing system for FM broadcast. Model
2200 is configured for analog inputs and outputs. Model
2200-D also includes digital inputs and outputs. Features
for all versions include:
• Universal Transmitter
protection and audio processing for
FM broadcast. The 2200 can be configured to interface
ideally with any commonly-found transmission system in the
• User-friendly Interface: A simple liquid-crystal display
(LCD) makes setup, adjustment and programming easy. Front
panel bargraphs show metering functions of the processing
preset in use. Push one of the clearly labeled soft keys to
RECALL a preset, to MODIFY PROCESSING, or to access SYSTEM
• 8 factory-programmed presets, based on Orban’s Two-Band
and Protection/Limiting Processing Structures. These presets
can be modified and saved.
• 8 user presets to store customized settings.
• Pre-emphasis limiting for the internationally-used
pre-emphasis curves of 50 μs and 75μs. The pre-emphasis
control is almost never audibly apparent, producing a clean,
open sound with subjective brightness matching the original
• Extremely tight peak control; overshoot is limited to ± 0.3dB!
• DSP-based stereo encoder (stereo generator) produces a
circuit with excellent specs, high stability, and
uncompromising baseband spectrum control.
• Remote-control, via optically-isolated terminals that can
be operated with contact closures (to facilitate interfacing
to older-technology remote controls).
• Built-in line-up tone generator facilitating quick and
accurate level setting in any system and a Bessel Null tone
for calibrating modulation.
Service and User Manual
3.57 Mbytes (3738252 Bytes)
01 January 2000
Electronic document, no scan, very well readable.
24 October 2017
Section 1: Introduction
DIGITAL Audio Processor
Presets in the 2200
The Two-Band Structure
Protection Limiting: Orban’s Approach
Location of OPTIMOD-FM
About Transmission Levels and Metering
Section 2: Installation
Installation of 2200
Basic System Setup
System Setup Controls
Section 3: Operation
2200 Controls and Meters
Introduction to Processing
About the Processing Structures
Factory Programming Presets
Customizing the 2200’s Two-Band Sound
Two-Band Structures Processing Controls Details
Customizing the Protection Limiter Structure Sound
2200 Screen Displays
Section 4: Maintenance
Getting Inside the Chassis
In-System Testing (“Proof of Performance”)
Field Audit of Performance
Section 5: Troubleshooting
Problems and Possible Causes
Troubleshooting IC Opamps
Section 6: Technical Data
Schematics, Assembly Drawings