Metrix 931 K Generator
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Metrix 931 K ?
If you have any other manuals for the
Metrix 931 K you can upload the files here .
Model:
931 K
Date:
1967
Category:
Group:
Description:
Standard Signal Generator
Information
The Standard Signal Generator 931 H is designed for repairs,
production testing and design work on radio receivers and
similar apparatus, operating in the range 50 kc/s to 50 Mc/s,
1.2. Frequency is accurately set by the direct reading dial
and a 1000 point per scale vernier gives the possibility of
returning precisely to a previously noted frequency.
1.3. The RF circuit is designed for low drift and low
harmonic content end output is practically constant
throughout any given range. A strong detent mechanism gives
exact positioning of the coil turret.
1.4* Output, adjustable from a few tenths of a microvolt to
one volt on RF, ten times as much on AF, is monitored
permanently by a moving coil meter.
1.5. Output may be unmodulated RF, modulated RF (internal or
external), AF, or multivibrator. All outputs may be used
with the attenuator. RF level, modulation depth, and AF
level are all monitored.
1.G, The attenuator consists of a non inductive
potentiometer feeding a ladder network. Output impedance is
near 75 Ω except for 100 nV output lovol (0 to 40 Ω).
1.7» A standby Switch is provided that cuts all RF and AF
outputs whilst leaving the heaters on and dissipating the
same total heat as on normal output.
Manual type:
Service and User Manual
Pages:
20
Size:
18.64 Mbytes (19542857 Bytes)
Language:
english
Revision:
Manual ID:
Date:
1967 01 01
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2017 04 16
MD5:
8b6f952ec95bd69d1b0a324d5dab70ed
Downloads:
1272