Hewlett Packard 8175A Generator
Manufacturer:
Model:
8175A
Date:
1985
Category:
Group:
Description:
Digital Signal Generator

Information

The 8175A is a digital signal Generator which can deliver parallel and serial data with programmable patterns and pattern durations. It can interact with a device under test and so provide simulation of a wide range of data paths in digital systems. Some key features of the 8175A are as follows: Versatility Parallel data patterns Serial data streams Virtual Memory Expansion Programmable Pattern Durations Interaction with DUT Most logic families Master/Slave operation Fine Timing option Manual and automated operation Performance 24 ch. / I kbit ea. / 50 MBit ea. 2 ch. / 8 KBit ea. / 100 MBit ea. 255 memory segments, can sequence between 2 to 1024 patterns ea. 20 ns to 9.99 s range / 10 ns res., individually programmable 8 Bit Trigger / 8 Fiags TTL/CMOS variable; ECL fixed 2 ea HP 8175A’s fully synchronized 100 ps delay resolution on 4 channels large CRT, menu driven; waveform graphics, data editor, mass storage, hardcopy, HP-iB (*) interf ace

show more

User Manual
Manual type:
User Manual
Pages:
192
Size:
19.14 Mbytes (20071136 Bytes)
Language:
english
Revision:
Manual ID:
08175-90006
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
31 May 2015
MD5:
474e16d68c6a62d651c519a84dff08b5
Downloads:
503

Information

This Operating Manual contains information required to install, operate and test the Hewlett-Packard Model 8175A, (Service related information is located in the corresponding sections of the complete manual set). Figures 1-1 and 1-2, show the mainframe, the Accessories supplied with each and those available. Manual Contents The contents of this manual are as follows: Chapter 1 covers instrument identification, description, options, Accessories, specifications and other basic information. Chapter 2 provides installation instructions for the 8175A and its Accessories. It also includes information about initial inspection and damage claims, preparation for use, packaging, storage and shipment Chapter 3 is sub-divided into several sections, the purpose of the chapter is to familiarise you with operation of the 8175A. Manual operation of the 8175A is covered with the aid of a "Getting Started" section which includes several worked examples. The section is designed to help you learn the basics of instrument operation as quickly as possible. Comprehensive descriptions of all Main Displays, their menus, edit capabilites and how to use them are included. Remote (or programmable) operation is described, also with the aid of several worked examples. Appendices A-l and 2 Describe all display messages which may appear on the Generator screen during operation (A-l) and power-up (A-2). Appendix B explains how to control a printer. Appendix C explains how to control the disc memory accessory. Chapter 4 details performance testing of the instrument.

show more

Comments

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image