Hewlett Packard 5087A Amplifier
The Hewlett-Packard Model 5087A
is a narrow-band Amplifier
capable of receiving up to four different input frequencies
on three input channels. It amplifies these frequencies and
supplies outputs in any selected combination on a total of
12 output lines. Table 1-4 lists the assembly designation,
description, function, where it is used, the corresponding
HP part number and its assigned option number.
The three input lines are labeled A, B, and C while the 12
outputs lines are labeled 1 through 12. Each input line, as
well as the 12 output lines and the Power supply
may be monitored by a front-panel meter through a
16-position front-panel switch.
All input and output connectors and fuses are mounted on the
instrument rear panel. All controls and indicators are
mounted on the instrument front panel.
Service and User Manual
51.33 Mbytes (53818537 Bytes)
Scanned document, reading partly badly, partly not readable.
24 November 2013
SERIAL PREFIX: 1620A
This manual applies directly to HP Model 5087A
Amplifiers having serial prefix 1620A.
SERIAL PREFIXES NOT LISTED
For serial prefixes greater than 1620A, a “Manual Changes”
sheet is included with this manual.
Information in this manual applies directly to the
instrument “normal configurations” listed in Table 1-1. In
addition to the “normal configurations”, this manual applies
to all options listed in Paragraph 1-10.