Hewlett Packard 1124A Probe
Manufacturer:
Model:
1124A
Date:
Category:
Group:
Description:
Information
The Model 1124A Probe provides high voltage, high impedance, general-purpose probing capabilities for 50-ohm input, high frequency instruments. The Probe input RC, 10 megohms shunted by 10 picofarads, prevents circuit loading while a FET (field-effect transistor) circuit provides a bandwidth of dc to 100 MHz. A wide dynamic range, provided in two ranges (X10, X100), allows direct measurements up to 100 volts with either ac or dc coupling. The maximum safe input for the X10 range in the dc-coupled mode is ±300 volts (dc plus peak ac) for frequencies below 100 MHz. The X100 range extends the maximum safe input to ±500 volts (dc plus peak ac) for frequencies below 100 MHz. The maximum safe input in the ac-coupled mode is the same as for the dc-coupled mode except the dc component of the input signal must not exceed ±200 volts. Figure 1. Model 1124A Probe 3. The Model 1124A Probe extends the usefulness of 50-ohm systems such as Hewlett-Packard 183A Oscilloscope systems or the Hewlett-Packard Model 8553B/8552A Spectrum Analyzer system by adding general-purpose

show more

Service and User Manual
Manual type:
Service and User Manual
Pages:
10
Size:
514.58 Kbytes (526928 Bytes)
Language:
english
Revision:
Manual ID:
01124-90904
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
30 December 2017
MD5:
d864d78d88a35cabb1716db81c7f0e69
Downloads:
106

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image