Fluke 8840 Series Digital multimeter
The 8840 Series
has performance you would expect in
multimeters costing much more. Basic
dc accuracies to 0.003%
ac accuracies to 0.08% at one year are available.
See the specifications that follow for complete information
on measurement ranges and accuracy.
No internal adjustments are required for calibration. After
you initiate calibration via a recessed front panel switch,
you are led through a Software
controlled procedure that
even double checks to ensure that appropriate reference
inputs have been applied. Calibration can be performed under
front panel or GPIB/IEEE-488* control.
The 8840 Series
automatically performs adigital self-test
each time it is powered up. Additionally, you can initiate a
comprehensive analog and digital diagnostic self-test from
the front panel or through the IEEE-488 Interface
Powerful System Capabilities
Adding the inexpensive IEEE-488 Interface
option to the 8840
Series provides system capability which includes complete
system control of functions, ranges, and reading rates.
Front and rear panel inputs are switch-selectable from the
front panel (and you can sense the status of the switch over
the bus). Calibration and self-test can also be controlled
over the bus.
Powerful yet simple device dependent IEEE -488 code allows
the 8840 Series
DMMs to be easily integrated into your
system. System Software
written for the 8840A
with the 8842A
The mechanical design also contributes to performance and
convenience in system applications. The 8840A
case provides EMI shielding to ensure measurement integrity.
The unit can be mounted in a half-rack slot simply by
removing the handle, turning the “twist-away” rear feet, and
bolting on rackmount brackets.
Embodying all these features, the 8840 Series
DMMs are fully
programmable, powerful digital multimeters within reach of
every system builder.
447.96 Kbytes (458707 Bytes)
Scanned document, all readable.
2016 01 28