Fluke 225C ScopeMeter
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Fluke 225C ?
If you have any other manuals for the
Fluke 225C you can upload the files here .
Model:
225C
Date:
2009
Category:
Group:
Description:
Information
The Fluke I92B/196B-C7199B-C ScopeMeter test tools have
three input channels that are electrically floating with
respect to each other, and with respect to the power adapter
input.
Channel A and channel B are Oscilloscope channels with a
60/100/200 MHz bandwidth. The Meter/External Trigger channel
is a combined DMM and external trigger channel with a
limited (10 kHz) bandwidth.
The B versions have a black&white LCD, the C versions have a
color display.
Manual type:
Service Manual
Pages:
86
Size:
2.16 Mbytes (2265076 Bytes)
Language:
english
Revision:
revised
Manual ID:
PN 4822 872 05391
Date:
02 October 2009
Quality:
Electronic document, no scan, very well readable.
Upload date:
05 August 2017
MD5:
ec364392c8e1c6d05daeec0fbfc225e6
Downloads:
2536
Information
1
2
3
4
Title
Page
Safety
Instructions ...
1-1
1.1
Introduction ... 1-3
1.2 Safety
Precautions ... 1-3
1.3 Caution and Warning
Statements ... 1-3
1.4 Symbols
... 1-3
1.5 Impaired
Safety ... 1-4
1.6 General Safety
Information ... 1-4
Characteristics
...
2-1
List of Replaceable Parts
...
3-1
3.1
Introduction ... 3-3
3.2 How to Obtain
Parts ... 3-3
3.3 Final Assembly Parts
... 3-4
3.4 Main PCA Unit Parts
... 3-6
3.5 Accessories
... 3-8
Performance Verification
...
4-1
4.1
Introduction ... 4-3
4.2 Equipment Required For Verification
... 4-3
4.3 General Instructions
... 4-3
4.4 Operating
Instructions ... 4-4
4.4.1 Resetting the test tool
... 4-4
4.4.2 Navigating through menu’s
... 4-4
4.4.3 Creating Test Tool
Setup1 ... 4-5
4.5 Display and Backlight
Test ... 4-5
4.6 Scope Input A&B Tests
... 4-7
4.6.1 Input A&B Vertical Accuracy Test
... 4-7
4.6.2 Input A&B DC Voltage Accuracy
Test ... 4-9
4.6.3 Input A&B AC Voltage Accuracy Test (LF)
... 4-11
4.6.4 Input A & B AC Coupled Lower Frequency
Test ... 4-12
4.6.5 Input A and B Peak Measurements
Test ... 4-13
4.6.6 Input A&B Frequency Measurement Accuracy Test
... 4-14
4.6.7 Input A&B Phase Measurements
Test ... 4-15
4.6.8 Time Base Test
... 4-16
4.6.9 Input A Trigger Sensitivity
Test ... 4-17
4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth Test
... 4-19
4.6.11 Input B Trigger Sensitivity Test
... 4-20
4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth Test
... 4-21
4.6.13 Video test using the Video Pattern Generator
... 4-22
4.6.14 Video test using SC600 Scope Calibration Option
... 4-24
4.7 External Trigger Level Test
... 4-27
4.8 Meter (DMM)
Tests ... 4-28
4.8.1 Meter DC Voltage Accuracy Test
... 4-28
4.8.2 Meter AC Voltage Accuracy & Frequency Response Test
... 4-29
4.8.3 Continuity Function
Test ... 4-30
4.8.4 Diode Test Function Test
... 4-30
4.8.5 Ohms Measurements
Test ... 4-30
4.9 Probe Calibration Generator Test
... 4-32
5
Calibration Adjustment
...
5-1
5.1
General ... 5-3
5.1.1 Introduction
... 5-3
5.1.2 Calibration number and
date ... 5-3
5.1.3 General
Instructions ... 5-3
5.1.4 Equipment Required For Calibration
... 5-4
5.2 Calibration Procedure
Steps ... 5-4
5.3 Starting the Calibration
... 5-4
5.4 Contrast Calibration Adjustment
... 5-6
5.5 Warming Up &
Pre-Calibration ... 5-7
5.6 Final Calibration
... 5-8
5.6.1 Input A LF-HF Gain
... 5-8
5.6.2 Input B LF-HF Gain
... 5-9
5.6.3 Input A&B LF-HF Gain
... 5-11
5.6.4 Input A&B Position
... 5-12
5.6.5 Input A&B Volt Gain
... 5-13
5.6.6 DMM Volt Gain
... 5-14
5.6.7 Input A& B, and DMM
Zero ... 5-15
5.6.8 DMM Ohm Gain
... 5-16
5.6.9 Calculate
Gain ... 5-17
5.7 Save Calibration Data and
Exit ... 5-17
5.8 Probe Calibration
... 5-19
6
Disassembling the Test
Tool ...
6-1
6.1.
Introduction ... 6-3
6.2. Disassembly & Reassembly Procedures
... 6-3
6.2.1 Required Tools
... 6-3
6.2.2 Removing the Tilt Stand & Hang
Strap ... 6-3
6.2.3 Replacing the Side-Strap, Changing the Side-Strap
Position ... 6-3
6.2.4 Opening the Test Tool, Removing the
Battery ... 6-3
6.2.5 Removing the Main PCA Unit and the
Fan ... 6-5
6.2.6 Removing the Display Assembly
... 6-6
6.2.7 Replacing the LCD Window/Decal
... 6-7
6.2.8 Removing the Keypad and Keypad
Foil ... 6-7
6.2.9 Disassembling the Main PCA
Unit ... 6-7
6.2.10 Reassembling the Main PCA
Unit ... 6-8
6.2.11 Reassembling the Test Tool
... 6-9
Add Comment
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.
Comments