Amplifier Research 60S1G3 Amplifier
No picture available!
Maybe you can upload a photo for the
Amplifier Research 60S1G3 ?
If you have any other manuals for the
Amplifier Research 60S1G3 you can upload the files here .
The Model 60S1G3
is a solid state, self-contained,
air-cooled, broadband Amplifier
applications where instantaneous bandwidth, high gain and
linearity are required. Housed in a stylish
contemporary cabinet, the unit is designed for benchtop use,
but can be removed from the cabinet for
immediate equipment rack mounting.
when used with a sweep Generator
, will provide a
minimum o f 60 watts o f RF power.
Included is a front panel gain control which permits the
operator to conveniently set the desired output
level The 60S1G3
is protected from RF input overdrive by an
RF input leveling circuit which controls
the RF input level to the RF Amplifier
first stage when the
RF input level is increased above 0 dBm.
The RF Amplifier
stages are protected from over-temperature
by removing the DC voltage to them if an
over-temperature condition occurs due to cooling blockage or
fan failure. There is a digital display on
the front panel to indicate the operate status and fault
conditions if an over-temperature or power
supply fault has occurred. The unit can be returned to
operate when the condition has been cleared.
digital panel provides control of all Amplifier
functions both locally and remotely via
IEEE-488 (GPIB) or RS-232 interfaces.
The low level of spurious signals and linearity of the Model
make it ideal for use as a driver
in testing wireless and communication components
and subsystems. It can be used as a test
instrument covering multiple frequency bands and is suitable
for a variety of communication
technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also
suitable for EMC Test
applications where undistorted modulation envelopes are desired.
Service and User Manual
1.10 Mbytes (1152721 Bytes)
Scanned document, all readable.
10 September 2016
No Service Information