Amp Supply LA-1000-NT Amplifier
No picture available!
Maybe you can upload a pic for the
Amp Supply LA-1000-NT ?
If you have any other manuals for the
Amp Supply LA-1000-NT you can upload the files here .
1200 Watt No-Tune Amplifier
The LÀ-1000-NT is a self-contained, high frequency linear
capable of operation at 1200 watts PEP
sideband and up to 1000 watts CW input power. The bandswitch
positions provide NO-TUNE-UP operation on 160 through 10
meter amateur bands. The LA-1000-NT
is capable of high speed
break-in CW (QSK) when used with a QSK Transceiver
also incorporates a feature permitting
optimization of efficiency in either the CW or SSB subband
on 160 and SO meters. The LA-1000-NT
can be manually tuned
internally to cover just about any portion of the spectrum
from 1.8-30 MHz.
FREQUENCY COVERAGE: Amateur bands 1.8-1.9, 3.5-4.0, 7.0-7.3,
14.0-14.350, 21.0-21.450, 28.0-29.5 MHz using factory preset
circuitry. The owner may adjust these settings to optimum
efficiency in any of these ranges.
SUBBAND SELECTION: Panel switch selects optimum no-tune-up
arrangement for either CW or SSB operation on 160 and 80 meters.
POWER INPUT: Up to 1200 watts PEP/SSB, and up to 1000 watts CW.
TYPICAL EFFICIENCY: 60-72 X depending on load, frequency, drive
DRIVE POWER: 100-140 watts PEP for rated input.
DISTORTION: Third order IM more than 31 dB below PEP output.
HARMONICS: Substantially better than FCC requirements;
typically -45 dB or better.
CW BREAK-IN: High speed QSK capability when used with a
suitable QSK Transceiver
TUBE COMPLIMENT: Four 6MJ6 heavy duty penthodes, with drive
applied to the first grid and cathode—termed super drive.
COOLING: Full-cabinet ducted forced air. Air is drawn in the
bottom front and exhausted out the rear back.
2.51 Mbytes (2631529 Bytes)
01 January 1984
Scanned document, all readable.
15 October 2017