|LeCroy 7242B Oscilloscope|
7242B Plug-In for the 7200 Series Modular Oscilloscope System General The LeCroy 7242B, 2 channel Plug-In is a high bandwidth, long record length Plug-In for the LeCroy 7200 Series Modular Oscilloscope System. With a second 7242B plug-in, the 7200 Series provides 4 channels of simultaneous 1 GS/s digitizing. The two input channels have flexible signal conditioning allowing the user to select 50Ω or 1MΩ input impedance with input sensitivities of 5 mV/div to 2.5 V/div. The 7242B records 200,000 sample points on each input channel (1,000,000/channel optional). These long memories maintain full sample rate and usable bandwidth over a wide range of timebase settings. By segmenting the memory, up to 4000 waveforms/channel can be acquired at high trigger rates. Smart Trigger lets the user trigger on complex waveforms like glitches or bit streams, so rare or subtle events can be observed.
These manuals are available for the above equipment:
|LeCroy -- 7242B -- Service Manual|
|Manual Type||Service Manual|
|Size||133.61 Mbytes (140096737 Bytes)|
|Quality||Scanned document, reading partly badly, partly not readable.|
|Upload date||26 January 2013|
|Downloads||1040 since 26 January 2013|
This service manual contains information to maintain the LeCroy 7242 Series Plugin for the 7200 Series Modular Digital Oscilloscope. The manual is divided into eight sections as follows: 1. General Information Contains the 7242 description, specifications, and characteristics. 2. Performance Verification Contains the performance tests necessary to verify instrument specifications, including recommended test equipment and test record form. 3. Adjustments / Calibration Contains the necessary procedures to adjust the instrument after servicing. 4. Basic Operation / Block Diagrams Contains operation descriptions and block diagrams for the instrument. 5. Disassembly Contains the disassembly and assembly procedures. 6. Troubleshooting Contains troubleshooting flowcharts to assist in the repair of the instrument. 7. Schematics I Reference Diagrams Contains schematics and component location diagrams. 8. Parts List Contains Replaceable and Full parts lists.
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.