Equipment information

Yaesu FT-101E Transceiver
Model FT-101E
Category Radio Communication
Group Transceiver
Description SSB Transceiver
                                    The model FT-101E/277E SSB Transceiver is a precision built,
compact high performance Transceiver of advanced design
providing SSB (USB. LSB selectable). CVV and  V1 modes of
operation The Transceiver operates at an input of 260 watts
SSB. 180 watts CW and 80 watts AM on all bands 160 to 10 meters.

All circuits, except the Transmitter driver and linear
amplifier, are transistorized and composed of standard
computer type plug-in modules, permiting easy maintenance.

The Transceiver is self contained, requiring only an
an-tenna and an A.C. mains for home, portable or mobile
operation. The Transceiver may be operated from 100/110/
117/200/220/23-1 volts AC when appropriately wired but is
normally supplied for 117 volt AC and 12 volt DC operation.
The two way solid state Power Supply is an integral part of
the unit. Two power cords are provided with the Transceiver.
Selection of AC or DC power source is automatically made
when the proper line cord plug is inserted.

For mobile operation a separate switch is provided on the
front panel to turn off the tube heaters while in
the receive mode. In this mode the Transceiver draws only
0.5 amp. less than your auto dash lights.

All accessories, such as VOX. break in CVV with side tone.
25 and 100 KHz calibrators, noise blanker, 10 MHz WWV are
built in. In addition . dual VFO adaptor, crystal control
adaptor, speaker and clarifier arc integral parts of the
unit. Provision is made for the installation of 600 h
crystal filter for the exper t CVV DX operator. The CVV
filter is selected automatically when the Transceiver mode
switch is placed in the CVV position.

The entire Transceiver weighs approximately 30 pounds, is 13
1/2” wide, 6" high. 11 1/2" deep. Construction is of
heavy-gauge steel which provides an extremely rugged
package, virtually immune to the effects of vibration and shock

The SP 101P1V277PB combination Phone patch and external
speaker, is a valuable optional accessory for base
operation. The unit features an elliptical type speaker for
high quality voice reproduction. Other optional

equipment includes the FV-101B/277B external VFO and mobile
mounting brackets.

These manuals are available for the above equipment:

Manual Type Service and User Manual Yaesu-2075-Manual-Page-1-Picture
Pages 37
Size 2.80 Mbytes (2936840 Bytes)
Language english
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 cb9b58f0391b9370534fbc3b1544f837
Downloads 2430 since 26 December 2010

Manual Type User Manual with schematics Yaesu-6247-Manual-Page-1-Picture
Pages 43
Size 3.83 Mbytes (4012724 Bytes)
Language english
Quality Scanned document, all readable.
Upload date
MD5 500bc754d546f9001e4ee81bf6beeef8
Downloads 1379 since 31 July 2014

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics