Equipment information

Technics SX-KN2000 Keyboard
Manufacturer
Technics
Model SX-KN2000
Date
Category Professional music equipment
Group Keyboard
Description PCM Keyboard
Information
                                    BASIC FUNCTIONS

0 DEMO
Pre-recorded performances are used to demonstrate the individual appeal of 
the rhythms, sounds and other features.

0 BACKGROUND SOUND (BGS)

Five unique background sounds add special life and interest to your 
performance. The FADE OUT button is pressed once for slowly diminishing 
background sound, twice for immediate cut-off. The volume is adjusted with 
the BGS buttons.

0 RHYTHM GROUP

Various rhythm patterns are available for each rhythm group. Other rhythm 
controls are START/STOP, SYNCHRO & BREAK, INTRO & ENDING, COUNT 
INTRO and FILL IN 1 and 2. The volume is adjusted with the DRUMS balance 
buttons below the display.

•	AUTO PLAY CHORD

This feature is activated when the ONE FINGER, FINGERED or PIANIST button 
is turned on. An automatic accompaniment appropriate for the selected 
rhythm is produced when you play a chord. MEMORY allows you to continue 
the accompaniment even after the chord keys are released. The volume for 
each part of the AUTO PLAY CHORD (DRUMS, BASS, ACCOMP 1, 2, 3) is 
adjusted with the respective balance buttons below the display.

0 TRANSPOSE

C is the standard setting, but you can raise or lower the key of the entire 
instrument with these two buttons. The transposed key is shown on the 
normal performance display.
•	MANUAL PERCUSSION

The three buttons are used to add percussion sounds during your 
performance. The desired Keyboard PERCUSSION sounds are easily stored 
in the buttons. The buttons can also be programmed for other functions, such 
as rhythm start/stop.

0 COMPOSER

Create original rhythm patterns, either in realtime or with the step record 
method, or modify preset rhythms. Store up to 12 new rhythms in the 
reserved memory locations and recall them as you play, just like the preset 
rhythms.

0 ONE TOUCH PLAY

Select a rhythm and press the ONE TOUCH PLAY button until the panel 
settings change. The sounds and effects perfect for the selected rhythm are 
automatically set in seconds. Or press the ONE TOUCH PLAY button briefly to 
access the MUSIC STYLE SELECT display. Choose one of the many music 
styles and the appropriate sounds, effects and even rhythm are set instantly.

0 MUSIC STYLE ARRANGER

A tap of a button during your performance changes the rhythm and sounds to 
a simpler or flashier arrangement to match the feeling of the music.

•	PITCH BEND

This wheel is moved up or down with your hand to create a continuous 
change in pitch. The wheel returns to the center position automatically when 
it is released.
1-2
• MODULATION

Add vibrato to the sound by turning the wheel upwards.

0 DISPLAY (LCD screen)

Displays performance information, function settings and other messages.

•	Use the DISPLAY ANGLE wheel to set it to the angle at which it is easiest 
to read.

•	Use the CONTRAST button to adjust the display so that it is easy to read.

0 SEQUENCER

With this feature you can separately play and record the parts for an entire 
song. Then have the whole ensemble performance played back 
automatically. This is a true 16-track sequencer, with full realtime recording, 
step recording and editing features.

0 MEMORY & CONTROL

The settable functions in this mode include initialization, foot switch and PAD 
button function-assignment, and settings related to Disk Drive operation.

0 SOUND

This button is used for making the various sound, volume and effect settings 
for each part, as well as tuning and TECHNI-CHORD type, by reading the 
display.

0 SOUND GROUP

Various sounds are available for each sound group.
1-3
0 Effects

Turn the DIGITAL REVERB button on to add reverberation to the sound. 
DIGITAL EFFECT gives the sound a thickness and diffusion. The DSP EFFECT 
changes the quality of the sound. When SUSTAIN is on, the musical tones 
fade gradually after the keys are released.

0 TECHNI-CHORD

Chord notes played on the left section of the Keyboard are added to melody 
notes played on the right section. Choose from four harmonic styles.

0 CONDUCTOR

These buttons allow you to assign a different sound to each part, and then 
assign the desired part to the entire keyboard, assign a different part to each 
section of the keyboard, or mix parts. When the Keyboard is divided into 
sections, change the dividing point with the SPLIT POINT button.

0 SOUND EDIT

Modify preset sounds to create new and unique sounds.

0 PANEL MEMORY

Set up the sounds and effects, and then store them in these 24 memories (3 
BANKS x 8 memory locations) buttons for instant recall as you play. You can 
expand the range of storable settings to include the rhythm selection, tempo 
setting and more.

Disk Drive

This Disk Drive allows you to store up to 20 SEQUENCER performances and 
other data on a 3.5-in. 2DD memory disk

These manuals are available for the above equipment:

Manual Type User Manual Technics-1624-Manual-Page-1-Picture
Pages 122
Size 4.04 Mbytes (4234528 Bytes)
Language english
Revision
Manual-ID/Number QQTG0187A
Date
Quality Scanned document, all readable.
Upload date
MD5 f39467af7afd919a7b0cb2922f782a9f
Downloads 11018 since 26 March 2009
Information
Technics-1624-Manual-Page-1-Picture


Manual Type Service Manual Technics-11540-Manual-Page-1-Picture
Pages 39
Size 14.80 Mbytes (15514202 Bytes)
Language english
Revision
Manual-ID/Number EMID931438
Date
Quality Scanned document, all readable.
Upload date
MD5 f5928593c08859aa2e571cf7d1f622a2
Downloads 95 since 23 December 2018
Information
PART I (INTRODUCTION)

SAFETY PRECAUTION  ... 1-1

ARRANGEMENT OF CONTROL PANEL  ... 1-2

BASIC FUNCTIONS  ... 1-2

INITIALSETTING  ... 1-4

OPTIONS AND CONNECTIONS ... 1-4

CONDUCTOR SETTINGS  ... 1-5

PARTS LOCATIONS ... 1-6

Keyboard RANGES ... 1-6

DISASSEMBLY INSTRUCTIONS ... 1-7

SYMPTOMS WHICH APPEAR TO BE SIGNS OF

TROUBLE ... 1-10

ERROR DISPLAY  ... 1-12

ABOUT THE SELF-DIAGNOSTIC FUNCTION ... 1-13

MIDI IMPLEMENTATION CHART  ... 1-15

PRECAUTIONS BEFORE SERVICING ... 1-17

■	PART II (SCHEMATIC DIAGRAM)

WIRING CONNECTION DIAGRAM ... 11-1

BLOCK DIAGRAM ... II-3
CIRCUIT BOARD  ... II-6

CIRCUIT DIAGRAM  ... II-9

CIRCUIT BOARD ... 11-13

CIRCUIT DIAGRAM ... 11-17

| CIRCUIT BOARD  ... 11-20

I CIRCUIT DIAGRAM  ... 11-23

MANUAL Keyboard 1, 2 CIRCUIT DIAGRAM AND CIRCUIT BOARD 
 ... 11-27

PART III (REPLACEMENT PARTS LIST)

REPLACEMENT PARTS LIST

(P.C.B. and Wiring Parts) ... III-1

EXPLODED VIEWS OF CABINET  ... III-7

REPLACEMENT VIEWS OF CABINET

(Cabinet and Chassis Parts)  ... III-9

PACKING  ... IIMO
Technics-11540-Manual-Page-1-Picture


Comments (3)

 
Topic: Technics SX-KN2000
0/5 (0)
 
Gravatar
New
Waldemar Queiroz
Gravatar
1
0
0
Feb 2015
Gravatar
New
Edgar
Gravatar
1
0
0
Oct 2014
Edgar says...
Sinds Yesterday I'am the proud owner off this wonderfull Instrument.
The only thing I still try to find is technical data and a service manual.
Gravatar
New
matteo
Gravatar
1
1
0
Mar 2014
First Poster
matteo says...
Grin Great Guys Genius....too Great!! Thanks very very much for the Manual for my Technics Kn 2000 !! Very Great ! TOPPPGrinLaughLaugh
 
Page 1 of 1
 

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics