Kenwood TL-922 Amplifier
Manufacturer:
Model:
TL-922
Date:
1977
Category:
Group:
Description:
Linear Amplifier

Information

1. The TL-922 is a Class AB2, grounded grid linear Amplifier developed by Trio-Kenwood through advanced high-power technology using two high-performance Eimac 3-500Z power tubes. It covers all bands 160 m through 10 m for SSB, CW and RTTY modes of operation. 2. Unprecedented Reliability The TL-922 is designed to provide stable, high RF output power for extended periods of continuous use. Engineered with Trio-Kenwood's advanced circuit and mechanical technology, the TL-922 employs two rugged 3-500Z power tubes to their full advantage. 3. Low Intermodulation Distortion Intermodulation distortion (IMD) is minimized through the use of negative R.F. feedback. 4. Quick Turn-On Warm-up is not necessary. The 3-500Z tubes are fast heating. 5. Full Safety System To protect you against any possible high voltage electric shock, your TL-922 has a double safety system comprised of interlocking switches. One interrupts the high voltage primary circuit while thje second directly grounds the secondary high voltage circuit. Also provided are bleeder resistors for discharging the high voltage capacitors and "DANGER” warnings at high voltage positions. Please observe all warnings, they are for your protection. 6. Newly-Developed Fan Motor Delay Stop Circuit To reduce power tube deterioration, your TL-922 has a newly-developed fan motor delay-stop circuit comprised of a thermal delay relay. The cooling fan will normally run for 140 seconds (TYP) after power is removed from the unit and will measurably extended tube life. 7. Mode Switch for Efficient Linear Operation MODE switching is provided to select between the SSB Mode for the maximum PEP output with good linearity, and the CW Mode for low power consumption and heat generation during extended periods of operation. 8. Linear Amplification Control Switch This switch is capable of setting your TL-922 in the straight-through state irrespective of the standby control on the exciter. 9. Variable Threshold Level (ALC Detector) The ALC circuit will accommodate exciters of 80 w to 120 w (nominal) by varying the ALC threshold level. This effectively prevents overdriving the final power tubes, limiting the Amplifier to its linear range and guaranteeing low distortion at maximum power. 10. Two Panel Meters In adjusting or monitoring your TL-922 one meter always indicates the (Ip) plate current; while, with the other, you may read (Ig) grid current, (RF) relative output, or (HV) high voltage. This facilitates ease of operation of your TL-922, 11. Rigid Mechanical Structure The die-cast side panels effectively support the weight of the Amplifier against shocks and jarring during transportation. Recessed side panel handles are provided so the Amplifier can be easily carried. 12. Vernier Plate Tuning Dial The PLATE tune dial is equipped with a reduction gear that facilitates easy tuning, particularly for the higher bands. It also effectively prevents accidental miss-tuning during operation. Controls and panel arrangement, designed to human engineering standards, provide superior ease of operation. 13. Neat, Contemporary Appearance Mechanical arrangement and sophisticated design match both the TS-820 and TS-520 Series transceivers. Your TL-922 can also be used as a high- quality, general purpose HAM band linear Amplifier.

show more

Service and User Manual
Manual type:
Service and User Manual
Pages:
23
Size:
879.99 Kbytes (901114 Bytes)
Language:
english
Revision:
Manual ID:
B50-2552-30 (K,W) (T)
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2017 01 08
MD5:
3e15d84f7ab96a824b29a75ce83e8667
Downloads:
984
Service Manual
Manual type:
Service Manual
Pages:
31
Size:
4.07 Mbytes (4272204 Bytes)
Language:
english
Revision:
Manual ID:
851 0835 00
Date:
Quality:
Scanned document, all readable.
Upload date:
2008 11 26
MD5:
51db33d7f344c88a92883739dd46eb9f
Downloads:
3802