Equipment information

GE Healthcare Vivid 7 Pro Ultrasound Equipment
Manufacturer
GE Healthcare
Model Vivid 7 Pro
Date 2007
Category Medical and Biomedical Equipment
Group Ultrasound Equipment
Description Ultrasound Scanner
Information
                                    Overview of the Vivid 7 Ultrasound Scanner
•
 Vivid 7 is a phased and linear array ultrasound imaging
scanner. It also has provisions for analog
input sources like ECG and phono, and a Doppler probe may be
connected and used too.
•
 Real Time 3D (RT 3D) was introduced as an option to Vivid 7
Dimension in 2004 (BT’04).
•
 The unit can be used for:
-
 2D Black and White imaging
-
 2D Color Flow
-
 M-Mode Black and White imaging
-
 Color M-Mode
-
 Doppler
-
 a number of combinations of the above
-
 Real Time 3D measurements (4D)
•
 Vivid 7 is a digital beam forming unit and can handle up to
192 element linear probes by use of
multiplexing.
•
 Signal flow from the Probe Connector Panel to the
Front-End, then to the Mid Processors and Back-
End Processor and finally to the monitor and peripherals.
•
 System configuration is stored on a hard disk drive (HDD)
and all necessary software is loaded from
the HDD on power up.

These manuals are available for the above equipment:

Manual Type Service Manual GEHealthcare-10698-Manual-Page-1-Picture
Pages 858
Size 29.96 Mbytes (31414663 Bytes)
Language english
Revision 11
Manual-ID/Number FC091194
Date 01 January 2007
Quality Electronic document, no scan, very well readable.
Upload date
MD5 a55e29670af85d4ff2c0c741c816d5ef
Downloads 211 since 01 April 2018
Information
This Service Manual provides installation and service
information for the Vivid 7 Ultrasound Scanning unit.
GEHealthcare-10698-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics