Equipment information

Mennen Medical Ltd. ENMOVE 1200 Monitoring System
Manufacturer
Mennen Medical Ltd.
Model ENMOVE 1200
Date 2006
Category Medical and Biomedical Equipment
Group Monitoring System
Description Patient Monitor
Information
                                    The ENMOVE 1200 Patient Monitor, a portable and accessible
patient monitor, is supplied by rechargeable batteries or
external AC power, which applies to adults, pediatric and
neonates. You can select different configurations as
required. Besides, the ENMOVE 1200 can be connected with the
central Monitoring System whereby a monitoring network will
be formed. Parameters that the Enmove 12000 can monitor
include: ECG, RESP, SpO2, NIBP, 2-channel TEMP, 2-channel
IBP, CO and CO2. It, integrating the functions of parameter
measurement, waveform monitoring, freezing and recording, is
a compact and lightweight patient monitor. Its color TFT LCD
is able to show patient parameters and 8 waveforms clearly.
The compact control panel and knob control, and the
easy-to-use menu system enable you to freeze, record, or
perform other operations conveniently.
The ENMOVE 1200 Patient Monitor measures patient’s ECG,
NIBP, SpO2, TEMP, RESP, IBP, CO and CO2 physiological
signals through the ECG electrode, SpO2 sensor, cuff,
temperature sensor and pressure transducer. During the
measurement, the patient monitor does not get energy or any
substance from the Human body, and does not release any
substance to the Human body. However, it releases sine wave
signals to the patient when measuring the respiration rate.
The patient monitor converts the measured physiological
signals to the digital signals, waveforms and values, and
then displays them on the screen. You can control the
patient monitor through the control panel. For example, you
can set different alarm limits for different patients. Thus,
when the patient monitor detects any physiological parameter
exceeding the preset alarm limit, it will enable the audio
and visual alarm.

These manuals are available for the above equipment:

Manual Type Service Manual Mennen-10223-Manual-Page-1-Picture
Pages 78
Size 2.60 Mbytes (2725761 Bytes)
Language english
Revision 3.8a
Manual-ID/Number 550-OPT-013
Date 01 March 2006
Quality Electronic document, no scan, very well readable.
Upload date
MD5 416e95c5f024d72fb0b9d8199bc18df8
Downloads 107 since 04 February 2018
Information
CHAPTER 1 ABOUT THE PRODUCT
 ... 1
1.1
 INTRODUCTION
 ... 1
1.2
 APPLICATION
 ... 1
1.3
 ENVIRONMENT
 ... 3
CHAPTER 2
PRINCIPLES ... 4
2.1
 GENERAL ... 4
2.2
 HARDWARE
DESCRIPTION ... 5
2.3
 SOFTWARE DESCRIPTION
 ... 17
2.4
 SYSTEM P ARAMETER
 ... 19
CHAPTER 3 PRODUCT
SPECIFICATIONS ... 25
3.1
 SAFETY CLASSIFICATIONS
 ... 25
3.2
 ENVIRONMENTAL
SPECIFICATIONS ... 26
3.3
 POWER SOURCE
SPECIFICATIONS ... 27
3.4
 HARDWARE SPECIFICATIONS
 ... 28
3.5
 WIRELESS NETWORK
 ... 29
3.6
 DATA STORAGE
 ... 30
3.7
 SIGNAL OUTPUT SPECIFICATIONS
 ... 31
3.8
 ECG SPECIFICATIONS
 ... 32
3.9
 RESP SPECIFICATIONS
 ... 34
3.10
 SPO2 SPECIFICATIONS
 ... 35
3.11
 IBP SPECIFICATIONS
 ... 37
3.12
 TEMP SPECIFICATIONS
 ... 38
3.13
 IBP SPECIFICATIONS
 ... 39
3.14
 CO SPECIFICATIONS
 ... 40
3.15
 CO2 S PECIFICATIONS
 ... 41
3.16
 AG SPECIFICATIONS
 ... 44
CHAPTER 4 DISASSEMBLING/ASSEMBLING &
TROUBLESHOOTING ... 47
4.1
 EXPRESS DISASSEMBLING/ASSEMBLING ... 
 ... 47
4.2
 TROUBLESHOOTING
 ... 52
CHAPTER 5 TEST AND MATERIAL
LIST ... 55
5.1
 TEST PROCEDURE
 ... 55
5.2
 NIBP CALIBRATION
 ... 59
5.3
 IBP
CALIBRATE ... 59
5.4
 CO2
CHECK ... 62
5.5
 AG
CALIBRATE ... 63
5.6
 EXPRESS MATERIAL LIST ... 
 ... 65
CHAPTER 6 MAINTENANCE AND CLEANING
 ... 66
6.1
 MAINTENANCE
 ... 66
6.2
 CLEANING
 ... 66
6.3
 CLEANING REAGENT
 ... 66
6.4
 STERILIZATION
 ... 67
6.5
 DISINFECTION
 ... 67
Mennen-10223-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics