|Tektronix P6015A Probe|
|Description||Passive High Voltage Probes|
P5100 High Voltage Probe The P5100 is a low-input capacitance High Voltage Probe (2.5 kV) designed for higher frequency applications. The Probe can be compensated to match plug-ins and oscilloscopes with nominal input capacitances of 7 to 30 pF. A variety of screw-on Accessories provide easy connection to the device under test. P5102 & P5120 Isolated Channel Applications In many applications, it is important to be able to isolate the measurement from earth ground and also to isolate the common voltage between channels. The P5102, paired with the THS700 Series handheld digital storage oscilloscopes, and the P5120, coupled with the TPS2000 Series digital storage oscilloscopes, deliver both the isolation for the measurement from earth ground and full isolation between the channels. The 100 MHz P5102 is designed to give you isolated channel performance for up to 1,000 V RMS CAT II when used with the THS700 Series oscilloscopes. The 200 MHz P5120 passive high voltage probe, for use with the TPS2000 Series oscilloscopes, is designed to give you up to 1,000 V RMS CAT II of isolated channel performance. A variety of screw-on adapters are available for easy connection to the device under test.
These manuals are available for the above equipment:
|Tektronix -- P6015A -- Datasheet|
|Size||191.99 Kbytes (196601 Bytes)|
|Date||01 January 2004|
|Quality||Electronic document, no scan, very well readable.|
|Upload date||27 December 2017|
|Downloads||315 since 27 December 2017|
No comments yet. Be the first!