Tektronix 1503C Level Meter
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Tektronix 1503C ?
If you have any other manuals for the
Tektronix 1503C you can upload the files here .
Model:
1503C
Date:
Category:
Group:
Description:
Metallic Time-Domain Reflectometer
Information
The Tektronix 1503C Metallic-cable Time-Domain Reflectometer
(MTDR) is a
cable test instrument that uses radar principles to
determine the electrical
characteristics of metallic cables.
The 1503C generates a half-sine wave signal, applies it to
the cable under test, and
detects and processes the reflected voltage waveform. These
reflections are
displayed in the 1503C liquid crystal display (LCD), where
distance measurements
may be made using a cursor technique. Impedance information
may be obtained
through interpreting waveform amplitude.
The waveform may be temporarily stored within the 1503C and
recalled or may be
printed using the optional dot matrix strip chart recorder,
which installs into the
front-panel Option Port.
Manual type:
Service Manual
Pages:
306
Size:
8.68 Mbytes (9097304 Bytes)
Language:
english
Revision:
Manual ID:
070-7170-05
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2017 12 25
MD5:
41aca3d4ef57d532e4e2c9719116f06e
Downloads:
511
Information
General Safety Summary ... .
... .
Service Safety Summary ... .
... .
General Information ... .
... .
Installation and Repacking ... .
... .
Contacting Tektronix ... .
... .
Operating Instructions
Operating Instructions ... .
... .
Overview ... .
... .
Preparing to Use the 1503C ... .
... .
Display ... .
... .
Front-Panel Controls ... .
... .
Menu Selections ... .
... .
Test Preparations ... .
... .
Cable Test Procedure ... .
... .
Additional Features (Menu Selected) ... .
... .
Operator Performance Checks
Operator Performance Checks ... .
... .
Specifications
Specifications ... .
... .
Electrical Characteristics ... .
... .
Environmental Characteristics ... .
... .
Physical Characteristics ... .
... .
Options and Accessories
Options and Accessories ... .
... .
Option 04: YT–1 Chart Recorder ... .
... .
Option 05: Metric Default ... .
... .
Option 06: EthernetR ... .
... .
Option 07: YT–1S Chart Recorder ... .
... .
Option 08: Token Ring Adapter ... .
... .
Option 09: Universal Service Ordering Code ... .
... .
Option 10: Token Ring Interface ... .
... .
Power Cord Options ... .
... .
Accessories ... .
... .
Circuit Descriptions
Circuit Descriptions ... .
... .
Introduction ... .
... .
Power supply ... .
... .
Processor System ... .
... .
Option Port Interface ... .
... .
Video Processor ... .
... .
Timebase ... .
... .
Pulse Generator/Sampler ... .
... .
Front Panel ... .
... .
Display Module ... .
... .
Option 06 (EthernetR) ... .
... .
Calibration and Adjustments
Calibration ... .
... .
Introduction ... .
... .
Calibration Performance Check ... .
... .
Display Module Check ... .
... .
Front Panel Check ... .
... .
Horizontal Scale (Timebase) Check ... .
... .
Vertical Position (Offset) Check ... .
... .
Noise Check ... .
... .
Impedance Check ... .
... .
Offset/Gain Check ... .
... .
RAM/ROM Check ... .
... .
Pulse Balance Check ... .
... .
Pulse Width Check ... .
... .
Auto Pulse Select Check ... .
... .
Jitter Check ... .
... .
Aberrations Check ... .
... .
Pulse Amplitude Check ... .
... .
Option 04/07: YT-1.YT-1S Chart Recorder Check ... .
... .
Option 05: Metric Default Check ... .
... .
Option 06: EthernetR Adapter Checks ... .
... .
Adjustment Procedures ... .
... .
Visual Inspection ... .
... .
Power supply Checks and Adjustments ... .
... .
Main Board "12 VDC Check and Adjust ... .
... .
LCD Check and Adjustment ... .
... .
Pulser/Sampler Voltage Check ... .
... .
Sampling Efficiency Adjustment ... .
... .
1st Blow-By Compensation Adjustment ... .
... .
Output Impedance Check ... .
... .
Option 06: EthernetR Adapter Adjustments ... .
... .
After Adjustments are Completed ... .
... .
Maintenance
Maintenance ... .
... .
Introduction ... .
... .
Preventive Maintenance ... .
... .
Part Removal and Replacement ... .
... .
Troubleshooting ... .
... .
Control Panel Installation ... .
... .
Installing the Case Cover Over the Chassis ... .
... .
Replaceable Electrical Parts
Replaceable Electrical Parts ... .
... .
Diagrams
Diagrams ... .
... .
Replaceable Mechanical Parts
Replaceable Mechanical Parts ... .
... .