Cornell Dubilier Electronics AR-33 Antenna
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Cornell Dubilier Electronics AR-33 ?
If you have any other manuals for the
Cornell Dubilier Electronics AR-33 you can upload the files here .
Model:
AR-33
Date:
1976
Category:
Group:
Description:
Autorotor
Information
The Cornell-Dubilier Model AR-33 Autorotor Rotor is designed
to support and rotate the largest television antennae. The
AR-33 is not intended for large Ham beams. For extremely
windy areas or large beams, the CDE Ham-M rotor is recommended..
The AR-33 is rated to support a dead vertical weight of 150
pounds, has 500 inch pounds of motor stall torque, and
resists an overturning moment of approximately 4000 inch
pounds without guying. Rotation is controlled within two
degrees accuracy. The rotor is lubricated for long fife and
will operate suitably at minus 20 degrees Fahrenheit.
The unit is shipped from the factory set at the end of
rotation in full "North" counter-clockwise position (looking
down at top of rotor).
Note that the rotor mast clamps are reversible thus allowing
clamping to large diameter (up to 2") or small diameter
(down to 7/8") masts. The lower mast support, which is
shipped unmounted, is not used when the rotor is mounted in
a tower.
Standard five-wire rotor control cable is available from any
electronics supply house. The following wire sizes are
recommended:
Manual type:
Service and User Manual
Pages:
8
Size:
2.63 Mbytes (2755883 Bytes)
Language:
english
Revision:
H
Manual ID:
ADO 50579-00
Date:
1976 01 01
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2017 08 01
MD5:
de588066ab8c8f02aa5b2dda8778946a
Downloads:
715