Equipment information

Grindmaster Corporation 3341 Freezer
Manufacturer
Grindmaster Corporation
Model 3341
Date 2000
Category Home electronics
Group Freezer
Description Remote Beverage Freezer
Information
                                    The Freezer consists of a freezing cylinder with a rotating
internal auger (dasher) that is belt-driven by an electric
motor. The auger scrapes frozen product off of the inside of
the refrigerated cylinder.
Crathco remote beverage freezers are designed to operate in
conjunction with a remote condensing unit or be
connected to a central refrigeration system. It is
recommended that the condensing unit have no more than 2 1/2 hp
per barrel to ensure maximum efficiency. The refrigerant
must be R404A (Dupont®HP62®). The refrigeration for each
barrel is controlled by the liquid feed solenoid. The liquid
feed solenoid is opened and closed by the limit switch
attached to the drive motor. (When the product consistency
reaches the desired point, the switch closes and
de-energizes the liquid feed solenoid 20 seconds later.)
Twin units operate with each barrel independently. Quick
connect refrigeration connections are supplied with each
unit. Each Freezer is factory supplied with 5/8" suction and
3/8" liquid connections. The piping connecting the Freezer
with the remote condensing unit or central system should
be sized according to industry standards. The installer is
responsible for sizing the refrigeration lines to the unit.
When properly operated and cared for, the remote freezers
will provide many years of service. Proper care includes
regular cleaning and maintenance. To minimize the amount of
maintenance necessary, follow the operating proce-
dures outlined in this manual.
There are four variations of the remote unit:
3341 – standard single barrel remote unit
3342 – standard twin barrel remote unit
3341A – single barrel remote unit with internal autofill system
3352 – dual barrel remote unit with internal autofill system

These manuals are available for the above equipment:

Manual Type Service and User Manual Grindmaster-8182-Manual-Page-1-Picture
Pages 40
Size 859.40 Kbytes (880025 Bytes)
Language english
Revision
Manual-ID/Number
Date 01 January 2000
Quality Electronic document, no scan, very well readable.
Upload date
MD5 c6d2165926bf33f199e825bc55b27933
Downloads 326 since 28 December 2016
Information
Introduction  ... .
 ... .
 ... 2
Freezer Application & Specifications ... .
 ... 2
Installation  ... .
 ... .
 ... 15
Operation & Adjustments  ... .
 ... .
 ... 7
Care and Cleaning  ... .
 ... .
 ... 8
Maintenance  ... .
 ... .
 ... 12
Troubleshooting  ... .
 ... .
 ... 15
Key Parts Identification  ... .
 ... .
 ... 16
Assembly & Wiring Diagrams (3341/3341A)  ... .
 ... 17
Assembly & Wiring Diagrams (3342/3352)  ... .
 ... 26
Autofill Connections Guide  ... .
 ... .
 ... 35
Grindmaster-8182-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics