Equipment information

Kikusui Electronics Corporation PAD 16-1OOL Power supply
Kikusui Electronics Corporation
Model PAD 16-1OOL
Category Measurement instruments
Group Power supply
                                    The PAD-L Power supply is designed for high operation
reliability and excellent electrical performance. It is a
universal-purpose industrial Power supply which can be used
as a variable power source for research and development, or
as a fixed power source for long time aging test. Features
of the PAD-L Power supply can be summarized as follows:
1. Improved«power factor at low output voltage:
A choke input system is used for the rectifier filter
circuit, thereby reducing the apparent input current and
improving the power factor. This led to a smaller power
transformer and consequently to a compact and light power
2. Less waveform distortion caused to the AC input line:
As the choke input system is used, the input current
waveform is less distorted with harmonics, thereby reducing
waveform .. distortion to the AC input
3. Excellent temperature coefficient:
Very low temperature drift characteristics of 50 ppm/°C is
attained by using premium-quality parts, improved circuits,
and forced air cooling. Time-elapse drift (aging drift) also
is very low. „ .... _ . . . .
4. Fast transient response:
A wide-band error Amplifier is used to ensure stable
frequency - gain, phase characteristics.
5. Low ripple and noise voltages:
Ripple and noise voltages are low, both in nos and peak values.
The output voltage is finely adjustable from 0 V to the
rated voltage with a 10-turn potentiometer
The Power supply has a current/voltage limit switch to
preset a current/voltage value. The set value of
constant-voltage/ constant-current operation can be checked
when in operation.
The Power supply has internal protection such as voltage
detector* current detector and temperature detector circuits.
An overvoltage protector (ÖVP), voltage adjustable from the
front panel, also is incorporated as a standard feature.
A high speed overvoltage protector (a thyristor crowbar
protection circuit) is available as an option.
The Power supply is boused in a casing for bench top use. It
can be installed on a standard EIA (JIS) rack.
- The user is requested to read thoroughly. this instruction
manua1 before' operating the Power supply. ·
* It is highly recommended to use the thyristor crowbar
highspeed overvoltage protector (OVP: option) for a load whose
- allowable voltage range is very narrow and which could be
damaged when a slight overvoltage is applied.

These manuals are available for the above equipment:

Manual Type User Manual Kikusi-7055-Manual-Page-1-Picture
Pages 67
Size 3.97 Mbytes (4167777 Bytes)
Language english
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 5145d55194ad359e4f015b57e925aecb
Downloads 761 since 14 August 2015

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics