Yaesu - FT-8000R - Transceiver
Manufacturer:
Image 1 of 2 provided by: DO7HJK - Achim
If you have any other photos or manuals for the
Yaesu FT-8000R
you can
upload the files here.
Equipment:
FT-8000R
Date:
Category:
Group:
Sub Group:
Information
The FT-8000R is a deluxe, compact FM mobile Radio communication/group/transceiver'>Transceiver providing wide-band receive capability, along with a host of features which provide state-of-the-art performance on the 2-m and 70-cm amateur bands. Included in the FT-8000R's feature complement are:
• 50 Watts of power output on VHF, and 35 Watts on UHF, with High/Medium/Low selection on each band.
• Expanded Receiver coverage: 110-550 MHz, and 750-1300 MHz (cellular telephone frequencies are blocked, and cannot be re-enabled).
• Outstanding packet Radio capability at 1200 or 9600 bps with easy Interface via a dedicated rear-panel jack.
• Dual Receive (VHF/UHF, VHF/VHF, or UHF/UHF) and Crossband Repeat capability is built in.
• 108 memory channels (54 per band) which store Repeater hifts, odd Repeater hifts, and CTCSS tones, plus one-touch HOME channels for each band.
• The Smart Search feature, which automatically sweeps a band and loads active frequencies into dedicated memory banks, is ideal for identifying active Repeater when visiting a city for the first time,exclusive Omni-Glow™ multi-function LCO display.
2 Manuals
Service manual
Manual type:
Service manual
Pages:
38
Size:
45.2 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
July 27, 2014
MD5:
fdbd0415-48f6-11f7-5863-c12dde0df6dc
Information
General Information and
Alignment...1
Introduction...1-1
Specifications...1-2
Chip Component
Information...1-3
Exploded View & Miscellaneous
Parts...2-1
Alignment...2-3
Servicing...3
Circuit
Description...3-1
Block
Diagram...3-7
Interconnection
Diagram...3-8
Board Units (Circuit Diagram, Parts Layout, Parts
List)...4
144-VCO
Unit...4A-1
430-VCO
Unit...4B-1
VR-L
Unit...4C-1
VR-R
Unit...4D-1
144-Main
Unit...4E-1
430-Main
Unit...4F-1
CNTL
Unit...4G-1
Panel
Unit...4H-1
Optional Board Unit (Circuit Diagram, Parts Layout, Parts
List)...5
FTS-22 Tone Squelch
Unit...5A-1
MH-36B6J DTMF
Microphone...5B-1
MH-42B6J Hand Scanning
Microphone...5C-1
The manual provides the technical information necessary for
servicing the FT-8000R Dual-Band mobile amateur Transceiver ervicing this equipment requires expertise in handling
surface-mount chip components. Attempts by non-qualified
persons to service this equipment may result in permanent
damage not covered by the warranty, and may be illegal in
some countries.
Two PCB layout diagrams provided for each double-sided board
in this Transceiver Each side of the board is referred to
by the type of the majority of components installed on that
side ("lead-
ed" or "chip-only"). In most cases one side has only chip
components, and the other has either a mixture of both chip
and leaded components (trimmers, coils, electrolytic
capacitors, ICs, etc.), or leaded components only.
Downloads:
2597
Last month downloads:
9
Download
yaesu--ft-8000r--service--ID6227.pdf
User manual
Manual type:
User manual
Pages:
67
Size:
5.9 MB
Language:
english
Revision:
Manual-ID:
E06481001
Date:
January 2003
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
March 16, 2020
MD5:
2bd8e416-7f81-b5f7-d4a2-2f9b383e69cd
Uploader:
DO7HJK - Achim
Information
Specifications...2
Accessories & Options...3
Front Panel Controls, Switches. & Connector. 4
Rear Panel Connections...10
MH-36 Microphone & Keypad...12
MH-42G4v Microphone & Keypad...13
Installation...14
Preliminary Inspection ...14
Installation Tips...14
Safety Information . . . ...15 Antenna Considerations...15
Mobile Installation...17 Transceiver Installation...17
Mobile Power Connections...18
Mobile Speakers...18
Base Station Installation ...19
FP-800AC Power Supply 19
Packet Radio TNC...19 Transceiver Cloning...21
ADMS-2 Programming Kit ...21
Operation...22
Preliminary Setup...22
Turning the Power On/Off...22
Supply Voltage Display...22
Adjusting the Volume and Squelch...23
Frequency Display and Band Change ... 24
Intelligent Band Display (IBD)...26
Keypad Beeper...26
Display Brightness ...26
Frequency Selection: “Dial” (VFO) Mode ... 27
Channel step Selection...28
VFO Tracking ...28 Receiver Muting ...28
Monoband Operation...30
VHF-VFH (V-V) or UHF-UHF (U-U) Operaüon 31
Sub Band Command Control...31
Transmission...32
Power Output Setting . ...32
PTT Locking...33 Repeater plits ...33
Memory Storage...37
Recalling Memories ...38
Alternating-Band Memory Selection (ASMS} . 39
Home Channel Memories...40
Memory Offset Tuning...40
Masking and Recovering Memories...41
Scanning . . . ...42
Memory Skip Scanning ...43
Programmable Band-Scan Limits...43
Smart Search Operation...45
Priority Channel Monitoring...48
CTCSS Operation...49
CTCSS Bell Paging with the FTS-22...51
DTMF Autodialer Operation...52
Packet Operation...54
Cross-Band Repeater Operation ...55
Time-Out Timer ...57
Automatic Power Off (APO)...57
Appendix ...59
Power-On Settings ...59
In Case of Problems...60
Resetting the CPU...60
Memory Backup...61
FTS-22 Installation...62
Internal Adjustments ...63
LCD DC Voltmeter Alignment...63
Downloads:
1170
Last month downloads:
15
Download
yaesu--ft-8000r--user--ID12747.pdf