Hewlett Packard - 1631D - Logic Analyzer
Manufacturer:
Image 1 of 3
If you have any other photos or manuals for the
Hewlett Packard 1631D
you can
upload the files here.
Equipment:
1631D
Date:
1986
Category:
Group:
Sub Group:
Information
The Hewlett-Packard 1630 and 1631 Logic Analyzer are
Interactive state and timing Analyzer for use in the design
and troubleshooting of digital systems. Many functions of
the systems are the same. The HP 1630A and 1631A have 27
state channels with three clocks and 8 timing channels. The
HP 1630D and 1631D have an additional 8 timing channels. The
HP 1630G has an additional 30 state channels. The HP 1631A and 1631D have two analog signal channels and an analog
trigger channel. All models feature a menu system for
defining measurements which simplifies setup time by
reducing the number and complexity of front panel keys.
Following is a listing of the key features of the HP 163X
systems.
1 Manual
Service manual
Manual type:
Service manual
Pages:
507
Size:
26.6 MB
Language:
english
Revision:
Manual-ID:
01630-90916
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
Dec. 1, 2013
MD5:
834a98d4-3bd9-e8e8-1cb1-933c627a1e35
Information
This manual applies directly to instruments with serial
numbers prefixed 1630A 2812A 1630D 2812A 1630G 2812A 1631 A; 2811A 1631D 2811A
With changes described within, this manual also applies to
instruments with serial prefixes 1630A 2242A through 2715A 1630D 2234A through 2720A 1630G 2415A through 2602A 1631 A; 2451A through 2714A 1631D 2446A
through 2713A
SECTION I, GENERAL INFORMATION. This section contains a
description of this manual and the HP 163X Logic Analyzer family. This section also gives specifications and
recommended test equipment for the Logic Analyzer ECTION II, INSTALLATION. Section II explains how to prepare
the Logic Analyzer for use.
SECTION III, OPERATION. Operation of the HP 1630A D/G and HP
1631 A/D is outside the scope of this service manual.
Section III does give a brief description of front panel
controls and information about configuration of the logic Analyzer for IHP-IB and HP-IL operation. For complete
operating instructions see the Operating Manual.
SECTION IV, CONFIDENCE TESTS. This section concerns the
execution of Software based function verification Self Test
(ST) tests, which includes the interpretation of status
codes to verify correct operation.
SECTION V, ADJUSTMENTS. The Logic Analyzer require several
adjustments that can be done with an Oscilloscope voltmeter, programmable signal source and controller; these
adjustments are covered this section.
SECTION VI, REPLACEABLE PARTS. This section contains
ordering information and a parts list for all models of the
family.
SECTION VII, INSTRUMENT CHANGES. This section has
information which describes changes to the instruments and
how to find proper documentation for the instrument being
serviced.
SECTION VIII, SERVICE. The Service section is divided into
eight subsections. The first subsection covers the overall
system. This includes system theory, and which service group
to reference with a failure. The service groups focus on
individual subsystems. Information in these groups includes
block and component level theory, mnemonics, and schematics
relating to that subsystem.
Downloads:
4104
Last month downloads:
15
Download
hewlett-packard--1631d--service--ID4949.pdf