WRL Electronics Globe Trotter Transmitter
Manufacturer:
No picture available!
Maybe you can upload a photo for the
WRL Electronics Globe Trotter ?
If you have any other manuals for the
WRL Electronics Globe Trotter you can upload the files here .
Model:
Globe Trotter
Date:
0
Category:
Group:
Description:
Information
The Globe Trotter incorporates the new hot cathode Xtal
Oscillator circuit which allows complete band coverage from
10 to 80 meters using only a 40 or 60 meter Xtal. A keying
Jack in the cathode of the Oscillator allows break in
operation on GW. The cathode coil switch, now serves to
switch one of three different Xtals into the osc grid and
the Band Switch serves to switch one of three sets of coils
into the osc and final plate circuits. One of the power
supplies is used for the final and modulators while the
other supplies the Osc, speech and driver stages. The speech
stage is conventional and allows the use of a Xtal or high
impedance dynamic mic. The driver is connected in parallel
as are the modulators and will supply sufficient modulation
to the final stage,
Provisions have been made for an Antenna changeover relay
and for remote operation of the Transmitter which is
explained in the tuning procedure.
Manual type:
Service and User Manual
Pages:
10
Size:
1.09 Mbytes (1145027 Bytes)
Language:
english
Revision:
Manual ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2014 07 06
MD5:
71294ee44223c375e3ead210b7052771
Downloads:
722