Thurlby Thandar Instruments TTI 1906 Digital multimeter
Manufacturer:
No picture available!
Maybe you can upload a photo for the
Thurlby Thandar Instruments TTI 1906 ?
If you have any other manuals for the
Thurlby Thandar Instruments TTI 1906 you can upload the files here .
Model:
1906
Date:
2009
Category:
Group:
Description:
Computing Multimeter
Information
This instrument is a mains operated, high performance autoranging multimeter providing 5½ digit resolution (± 210000 counts) switchable to 4½ digits (± 21000 counts) for a higher reading rate. It has a 7-segment l.e.d. display coupled with l.e.d. annunciators for displayed units and instrument status.
The main features are :-
• ARC serial Interface as standard, GPIB optional
• True RMS AC measurements
• Four-terminal Ohms
• Selectable audible continuity checker
• T/Hold mode - holds onto a stable reading until updated
• Display nulling - a different value can be set up for each function
• 100 point data logger - circular or linear store
• Measurement post-processing:-
percentage deviation from a user-entered reference
decibel calculations
linear scaling with offset
limits comparison for go/no go testing
automatic storage of minimum and maximum readings
• Selectable digital Filter
• Programmable buzzer
• Battery-backed RAM :-
storage of six instrument set-ups
automatic power up with last used settings.
retention of user entered references and scaling factors
retention of logged data
• Software calibration with constants stored in EEPROM
Manual type:
User Manual
Pages:
46
Size:
394.49 Kbytes (403958 Bytes)
Language:
english
Revision:
Issue 8
Manual ID:
48581-1070
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2013 11 03
MD5:
166796162a0d79fa13a814d7306ca4e4
Downloads:
637
Information
Introduction 1
Specification 2
Safety 5
EMC 7
Installation 8
Introduction to Front Panel 9
Making Basic Measurements 10
Advanced Features 13
Error Messsages 20
Default Instrument Settings 20
Remote Operation 21
Remote Commands 29
Maintenance and Repair 44
Manual type:
User Manual
Pages:
52
Size:
415.94 Kbytes (425919 Bytes)
Language:
german
Revision:
Issue 8
Manual ID:
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2013 11 03
MD5:
724a6ecdb11431435a7fc4607fdf21a2
Downloads:
491
Information
Introduction 1
Specification 2
Sicherheit 5
Installation 7
Einführung Zur Fronttafel 8
Grundmessungen 9
Fortgeschrittene Funktionen 12
Fehlermeldungen 21
Standardinstrumenteneinstellungen 21
Fernbetrieb 22
ARC-Fernbefehlsformate 30
Zusammenfassung der Fernbefehle 47
Wartung und Instandsetzung 49
Glossar 50
Manual type:
User Manual
Pages:
46
Size:
1.09 Mbytes (1138765 Bytes)
Language:
english
Revision:
Issue 7
Manual ID:
48581-1070
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2013 11 02
MD5:
8018e1732bc9bdac17f0aa5ec8598cde
Downloads:
633
Information
Introduction 1
Specification 2
Safety 5
EMC 7
Installation 8
Introduction to Front Panel 9
Making Basic Measurements 10
Advanced Features 13
Error Messsages 20
Default Instrument Settings 20
Remote Operation 21
Remote Commands 29
Maintenance and Repair 44
Manual type:
User Manual
Pages:
54
Size:
635.23 Kbytes (650475 Bytes)
Language:
french
Revision:
Issue 8
Manual ID:
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2015 05 08
MD5:
c57457770d68012888d8632d0b3d7aff
Downloads:
439
Information
Introduction 1
Specification 2
Securite 5
Installation 7
Presentation du panneau avant 8
Execution des mesures des base 9
Caracteristiques Evoluees 12
Messages d'erreur 20
Reglages par defaut de l'instrument 20
Fontionnement a distance 21
Commandes a distance 30
Resume des commandes a distance 45
Entretien et réparations 47
Glossaire 48
Manual type:
User Manual
Pages:
52
Size:
1.16 Mbytes (1214149 Bytes)
Language:
german
Revision:
Manual ID:
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2015 05 08
MD5:
f107e17177424dde67bf931f4efbafa0
Downloads:
564
Information
Introduction 1
Specification 2
Sicherheit 5
Installation 7
Einführung Zur Fronttafel 8
Grundmessungen 9
Fortgeschrittene Funktionen 12
Fehlermeldungen 21
Standardinstrumenteneinstellungen 21
Fernbetrieb 22
ARC-Fernbefehlsformate 30
Zusammenfassung der Fernbefehle 47
Wartung und Instandsetzung 49
Glossar 50