Telecommunications Techniques Corporation 41440A Interface
Hersteller:
Modell:
41440A
Datum:
1995
Kategorie:
Gruppe:
Beschreibung:
T1/FT1 DATA INTERFACE

Information

The T1/FT1 Interface Module can do all of the following: • Test Nx64 kb/s and Nx56 kb/s contiguous or noncontiguous fractional T1 or full T1 circuits. • Verify and troubleshoot Fractional T1 configurations. • T1/FT1 drop and insert capability that allows Nx56 kb/s or Nx64 kb/s bit error analysis without disrupting traffic on the remaining timeslots. • V.54 support for sending in-band loopbacks over a FT1 bandwidth. • ANSI T1.403 PRM support for reporting on far-end status /FIREBERD 6000 only). Requires Option 6009. ® Auto-scan and auto-coofigure to any Fractional T1 circuit. • T1 level and simplex current measurement. • Timing and pattern slips analysis. • CSU and smartjack (facility) loopback tests using built-in in-band or out-of-band ESF Data Link loop codes. • Responds to CSU loop up and loop down codes. • Transmits and monitors voice and ABCD signaling bits. • Generates logic, Bipolar Violations (BPVs), and frame errors. • Detects the presence of B8ZS, framed patterns, Yellow Alarm, Excess Zeros Alarm, AIS and ones density violation alarm conditions. • Monitors T1 signals using BPVs, frame errors, and CRC errors. • Measures and generates jitter with FIREBERD 6000,

mehr

Bedienungsanleitung
Dokumenttyp:
Bedienungsanleitung
Seiten:
76
Größe:
2.83 Mbytes (2970553 Bytes)
Sprache:
english
Revision:
G
Dokument-ID:
50-11732-01
Datum:
1995 06 01
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
2017 01 09
MD5:
3a9d7fb5ce4de35ae2515a667d7b18d4
Downloads:
364

Information

This Interface Manual applies to all FIREBERD 4000 Communications Analyzers Incorporating Software Revision 6.0, or higher and to all FIREBERD 6000 Communications Analyzers incorporating Sofware Revision J or higher. 1.0 GENERAL INFORMATION . 1 -1 1.1 INTRODUCTION., ... 1-1 1.2 Interface FEATURES ... 1-1 1.3 Interface COMPATIBILITY ... 1-2 1.4 OPTIONS AND ACCESSORIES ... 1-2 2.0 Interface DESCRIPTION ... 2-1 2.1 INTRODUCTION ... 2-1 2.2 PHYSICAL DESCRIPTION ... 2-1 2.2.1 Data Link/DSO RS-232 ... 2-1 2.2.2 RX INPUT/TX OUTPUT ... 2-2 2.2.3 T1 Ref Input ... 2-2 2.2.4 Handset ... 2-2 2.3 FUNCTIONAL DESCRIPTION ... 2-3 2.3.1 Full T1 ... 2-3 2.3.2 Fractional T1 ... 2-4 2.3.3 T1/FT1 Drop and Insert ... 2-4 2.3.4 ANSI T1.403 PRM ... 2-4 2.3.5 Voice ... 2-4 2.3.6 Test Loopback TLB ... 2-4 2.3.7 Line Loopback LLB ... 2-4 2.3.8 ESF Data Link ... 2-4 2.3.9 RS232 ... 2-5 2.4 SELF-LOOP OPERATION ... 2-5 3.0 FIREBERD 6000 INSTALLATION AND OPERATION ... 3-1 3.1 INTRODUCTION ... 3-1 3.2 INSTALLING THE Interface ... 3-1 3.3 FIREBERD 6000 MAINFRAME SET-UP ... 3-2 3.4 FIREBERD 6000 Interface MENU ... 3-2 3.4.1 FIREBERD 6000 Interface Menu Control ... 3-2 3.4.2 Configuration Menu ... 3-4 3.4.3 Mode Menu ... 3-5 3.4.4 Error insert Menu ... 3-8 3.4.5 Idle Selection Menu ... 3-8 3.4.6 Loop Type Menu ... 3-8 3.4.7 Receive Byte Selection Menu ... 3-9 3.5 FIREBERD 6000 ANALYSIS RESULTS ... 3-10 3.6 Interface STATUS INDICATORS AND SWITCHES ... 3-14 3.7 FIREBERD 6000 PRINTER OPERATION ... 3-15 3.8 FIREBERD 6000 REMOTE CONTROL COMMANDS ... 3-16 3.9 FIREBERD 6000 SELF-LOOP TEST ... 3-19 4.0 FIREBERD 6000 APPLICATIONS 4-1 4.1 INTRODUCTION ... 4-1 4.2 END-TO-END FRACTIONAL T1 TESTING ... 4-1 4.3 CSU LOOPBACK TESTING ... 4-2 4.4 INSTALLING AND TROUBLESHOOTING CUSTOMER PREMISE EQUIPMENT ... 4-4 4.5 T1/FT1 DROP AND INSERT ... 4-5 5.0 Fireberd 4000 INSTALLATION AND OPERATION ... 5-1 5.1 INTRODUCTION ... 5-1 5.2 INSTALLING THE Interface ... 5-1 5.3 Fireberd 4000 MAINFRAME SET-UP ... 5-2 5.4 Fireberd 4000 Interface MENU ... 5-2 5.4.1 Fireberd 4000 Interface Menu Control ... 5-2 5.4.2 Framing Menu ... 5-2 5.4.3 Coding Menu ... 5-4 5.4.4 Input Menu ... 5-4 5.4.5 Line Build Out Menu ... 5-4 5.4.6 Mode Menu ... 5-5 5.4.7 Idle Selection Menu ... 5-7 5.4.8 Error Insert Menu ... 5-7 5.4.9 Loop Type Menu ... 5-8 5.4.10 Loop Code Response Selection Menu ... 5-9 5.4.11 Receive Byte Selection Menu ... 5-9 5.4.12 Reference T1 Menu ... 5-9 5.5 Fireberd 4000 ANALYSIS RESULTS ... 5-9 5.6 Interface STATUS INDICATORS AND SWITCHES ... 5-11 5.7 Fireberd 4000 PRINTER OPERATION ... 5-12 5.8 Fireberd 4000 REMOTE CONTROL COMMANDS ... 5-13 5.9 Fireberd 4000 SELF-LOOP TEST ... 5-16 6.0 FIREBERD 4000 APPLICATIONS ... 6-1 6.1 INTRODUCTION ... 6-1 6.2 END-TO-END FRACTIONAL T1 TESTING ... 6-1 6.3 CSU LOOPBACK TESTING ... 6-2 6.4 INSTALLING AND TROUBLESHOOTING CUSTOMER PREMISE EQUIPMENT ... 6-4 6.5 T1 /FT 1 DROP AND INSERT ... 6-5 7.0 SPECIFICATIONS ... 7-1 7.1 INTRODUCTION ... 7-1 8.0 MAINTENANCE AND SERVICE ... 8-1 8.1 INTRODUCTION ... 8-1 8.2 MAINTENANCE ... 8-1 8.2.1 In Case of Difficulty ... 8-1 8.3 SERVICE ... 8-1 8.3.1 Warranty Policy ... 8-1 8.3.2 In-Warranty Service ... 8-2 8.3.3 Out-Of-Warranty Service ... 8-2 8.3.4 Equipment Return Instructions ... 8-2

mehr