Tektronix TCPA400 Verstärker
Hersteller:
Modell:
TCPA400
Datum:
Kategorie:
Gruppe:
Beschreibung:

Information

The TCPA300 and TCPA400 current Probe amplifiers let you use one Probe to simultaneously measure AC and DC current. The amplifiers convert the sensed current into a proportional voltage signal that you can measure directly with an Oscilloscope. The TCPA300 and TCPA400 current Probe amplifiers provide better linearity than other current measurement systems because of a current feedback process used with the Probe. DC measurement capability and high bandwidth allow the amplifiers to accurately represent square waves and fast-rise signals. The TCPA300 and TCPA400 and associated probes provide these features: Simultaneous DC and AC current measurements up to 750 A peak High sensitivity One-button autobalancing and Probe degaussing No adjustments needed to match a current Probe to an individual Amplifier AC or DC coupling of signal Direct scaling and unit readout on compatible TEKPROBE level II oscilloscopes

mehr

Service- und Bedienungsanleitung
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
205
Größe:
2.34 Mbytes (2454667 Bytes)
Sprache:
english
Revision:
Dokument-ID:
071-1183-03
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
28 September 2019
MD5:
3f212ee87757a6e92da801329992a9c9
Downloads:
862

Information

This document applies for firmware version 1.0 and above. This Instruction Manual supports the operation and basic maintenance of the TCPA300 and TCPA400 Current Probe Amplifiers, and the TCP300/400 Series AC/DC current probes that mate with the amplifiers.

mehr

Kommentare

Noch keine Kommentare, sei der erste Poster!

Kommentar hinzufügen

* Pflichtfeld
1000
Captcha Image