Philips PM 6307 Sonstiges
Hersteller:
Modell:
PM 6307
Datum:
1979
Kategorie:
Gruppe:
Beschreibung:
wow and flutter meter

Information

The easy-to-operate PM 6307 — Wow and Flutter Meter — is designed to identify and quantify unwanted speed variations in audio and video tape recorders, record players and movie projectors. With its X-tal controlled Oscillator giving the choice of 3.00 kHz or 3.15 kHz (DIN standard) it is possible to make very accurate wow and flutter checks and alignments. Readout of speed variations of, for example, a recorder is indicated on two separate analog meters, one for drift and one for wow and flutter. Calibration of the drift indicator is simple, being achieved by depressing the ZERO button, while the SET ZERO control is adjusted for zero indication. The use of the X-tal Oscillator eliminates the long warm-up time associated with normal R — C types with the advantage that the instrument can be used immediately after switch-on. The measuring ranges for drift and flutter are separately selectable by pushbuttons. There is also a convenient choice of three positions for wow and flutter measurements. With the Filter switched ON, the frequency response is "weighted", according to DIN Standard 45 507. In the Filter OFF position, a linear frequency response of 0.5 Hz to > 500 Hz is available and the "unweighted" flutter is indicated. For special measurements beyond the normal everyday usage, there is a connector on the rear panel to apply a desired external Filter.

mehr

Service- und Bedienungsanleitung
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
75
Größe:
3.04 Mbytes (3192446 Bytes)
Sprache:
english
Revision:
Dokument-ID:
9499 520 07702
Datum:
1979 10 15
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
2015 05 18
MD5:
99cadfab515d7fd6aa80ffa22a5d03fb
Downloads:
1661

Information

1. GENERAL 1.1. INTRODUCTION 1.2. TECHNICAL DATA 1.3. ACCESSORIES 1.4. OPERATING PRINCIPLE 2. INSTALLATION 2.1. SAFETY REGULATIONS 2.2. MOUNTING 2.3. EARTHING 2.4. ADJUSTMENT TO MAINS VOLTAGE - MAINS CONNECTION 2.5. DISMANTLING THE INSTRUMENT 3. OPERATING INSTRUCTIONS 3.1. CONTROLS AND SOCKETS 3.2. OPERATION 3.3. APPLICATIONS 4. SERVICE INSTRUCTIONS 4.1. CIRCUIT DESCRIPTION 4.2. ACCESS TO PARTS 4.3. CHECK AND ADJUSTMENT 4.4. CHECK AFTER REPAIR AND MAINTENANCE 4.5. PARTS LIST

mehr