Keithley 6430 Level Meter
Hersteller:
Kein Bild verfügbar!
Vielleicht kannst du ein Bild für
Keithley 6430
hochladen ?
Wenn du andere Handbücher für ein
Keithley 6430 hast,
kannst du die Dateien hier hochladen .
Modell:
6430
Datum:
2001
Kategorie:
Gruppe:
Beschreibung:
Sub-Femtoamp Remote SourceMeter
Information
Product overview
The SourceMeter combines a precise, low-noise, highly stable
DC Power supply with a lownoise, highly repeatable,
high-impedance multimeter and a remote preamplifier for
ultra low
current measurements. It has 0.012% basic accuracy with 5
1⁄2-digit resolution. At 5 1⁄2 digits, the
SourceMeter delivers 520 readings/second over the IEEE-488
bus. At 4 1⁄2 digits, it can read up
to 2000 readings/second into its internal buffer. The unit
has broad source and measurement ranges:
Source voltage from 5μV to 210V; measure voltage from 1μV to
211V.
Source current from 0.5fA to 105mA; measure current from
10aA to 105.5mA.
Measure resistance from 100μΩ (<100μΩ in manual ohms) to 21.1TΩ.
Maximum source power is 2.2W.
NOTE
The Model 6430 is Y2K compliant.
Some additional capabilities of the SourceMeter include:
Perform measurements at the DUT using the small Remote PreAmp.
Concurrent measurements of all three functions over the
remote Interface.
Source-measure sweep capabilities (linear and logarithmic
staircase sweeps, source
sweep list of up to 1000 points, memory sweep of up to 100
instrument setups).
6-wire ohms measurement with programmable I-source or
V-source with V or I clamp.
2.2W, 4-quadrant source and sink operation.
Up to 11 stages of limit testing with a built-in comparator
for pass/fail testing.
Digital I/O for stand-alone binning operations or Interface
to component handler.
Programming language and remote interfaces — The SourceMeter
uses the SCPI programming language and two remote Interface
ports (IEEE-488/GPIB and RS-232C).
Trigger-Link Interface to Keithley Series 7000 switching
hardware.
Math expressions — 5 built-in, up to 5 user-defined (bus only).
Reading and setup storage — Up to 2500 readings and seven
setups (five user defaults, factory default, *RST default)
can be stored and recalled.
Closed-cover calibration — The instrument can be calibrated
either from the front panel or remote Interface.
Dokumenttyp:
Bedienungsanleitung
Seiten:
558
Größe:
2.29 Mbytes (2404248 Bytes)
Sprache:
english
Revision:
D
Dokument-ID:
6430-901-01
Datum:
2001 06 01
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2018 08 22
MD5:
6a7ce5c7365a6af250e6ac1dac40be72
Downloads:
521
Information
Instruction Manual