IFR FM/AM-1000S Communications Service Monitor
Hersteller:
Bild 1 von 1
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
IFR FM/AM-1000S hast,
kannst du die Dateien hier hochladen .
Modell:
FM/AM-1000S
Datum:
1981
Kategorie:
Gruppe:
Beschreibung:
Information
The FM/AM-IOOOS is a portable Communications Service Monitor
capable of performing a variety of transmission test
functions normally associated with most types of
transceiving equipment (e.g. , citizen's band radios, FM
two-way radios, single sideband equipment, repeaters and
AM/FM/SSB transceivers).
As a portable unit containing an internal rechargeable
battery pack, operation of FM/AM-1000S is possible almost
anywhere without concern for immediate power. Mobile,
aircraft or marine operation is possible directly from 11 to
28 volt DC power systems, using a furnished cigar lighter
adaptor plug. AC power operation is possible from 110/230
VAC, 47 to 420 Hz power services.
Dokumenttyp:
Bedienungsanleitung
Seiten:
351
Größe:
9.17 Mbytes (9614190 Bytes)
Sprache:
english
Revision:
Dokument-ID:
1002-2381-400
Datum:
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
2014 01 19
MD5:
c5f252938133592719cb235dacc5961e
Downloads:
2025
Information
This manual part number 1002-2381-400 shall be used with
FM/AM-1000S Operation Manual part number 1002-2381-200 and
FM/AM-1000A Operation Manual part number 1002-2382-000.
This manual contains instructions for operating the
FM/AM-1000S as a general purpose communications service
monitor. The instruction level of this manual is relatively
basic and presupposes no previous experience on the part of
the operator with a communication serivce monitor of this
type. A basic understanding, however, of communication
electronics and practical troubleshooting methods will be
helpful. It is strongly recommended that operator be
thoroughly familiar with Sections 1 through 3 of this manual
before attempting to perform any operating procedures
contained in Section 4.
ORGANIZATION:
The operation manual is divided into the following major
sections: SECTION 1 - INTRODUCTION
Provides a brief introduction to the FM/AM-1000S including
purpose, functional capabilities and uses.
SECTION 2 - INSTALLATION
Provides a step by step procedure for setting up the
FM/AM-1000S for operation in either a mobile or test bench
environment.
SECTION 3 - DESCRIPTION OF CONTROLS, CONNECTORS & INDICATORS
Identifies and functionally describes aTT FM/AM-1000S
controls, connectors and indicators.
• As an operati ng aid, Figure 3-1 (which 1ocates and i
dentifi es all FM/AM-1000S front panel controls) has been
incorporated into a fold-out page. By extending the fold-out
page, the operator can easily reference any front panel
control while simultaneously performing any operating
procedure contained elsewhere in this manual.
SECTION 4 - OPERATION
Contains a selection of basic operating procedures
pertaining to all major functions of the FM/AM-1000S
in
addition to an assortment of common Receiver and Transmitter
tests which can be performed using the FM/AM-1000S,
SECTION 5 - UUT Receiver TESTING
Contains logical flowcharts which provide operator with a
systematic method of:
a. Aligning typical AM/FM receivers.
b. Locating and diagnosing most common malfunctions or
breakdowns in typical AM/FM receivers.
Useful supplementary information relating to the operation
of the FM/AM-1000S is contained in appendices at rear of
manual.