Hewlett Packard 8558B Spektrumanalysator
Hersteller:
Bild 1 von 3
Bild 2 von 3
Bild 3 von 3
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
Hewlett Packard 8558B hast,
kannst du die Dateien hier hochladen .
Modell:
8558B
Datum:
1985
Kategorie:
Gruppe:
Beschreibung:
Spectrum Analyzer .1-1500MHz
Information
The HP 8558B displays the amplitude and frequency of each
component of an input signal on a CRT. This display gives
quantitative information often not available from a
conventional Oscilloscope. The HP 8558B is capable of
measuring signals from - 117 dBm to +30 dBm over a frequency
range of 100 kHz to 1500 MHz.
Option 001: -110 dBm to + 30 dBm Option 002: - 63 dBm V to
+80 dBm V
The complete measuring system includes the HP 8558B Spectrum
Analyzer plugged into a compatible Hewlett-Packard display
mainframe.
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
439
Größe:
78.01 Mbytes (81804089 Bytes)
Sprache:
english
Revision:
Dokument-ID:
08558-90102
Datum:
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
2013 12 01
MD5:
c6affa8a818862326d82bcf3da18ea9e
Downloads:
11556
Information
This manual applies directly to instruments with serial
numbers prefixed 2436A.
With modifications described in Section VII, this manual
also applies to instruments with serial number prefixes
1914A through 2332A. For instruments with serial number
prefixes lower than 1914A, refer to the HP 8558B Operation
and Service Manual dated October 1977, HP Part Number
08558-90043, and the Manual Changes supplement supplied with it.
This manual is divided into eight sections as follows:
SECTION I, GENERAL INFORMATION: contains the instrument
description and specifications, explains Accessories and
options, and lists recommended test equipment.
SECTION II, INSTALLATION AND OPERATION VERIFICATION:
contains information concerning initial mechanical
inspection, preparation for use, operating environment,
packaging and shipping, and operation verification.
SECTION III, OPERATION: contains detailed instructions for
operation of the instrument.
SECTION IV, PERFORMANCE TESTS: contains the necessary tests
to verify that the electrical operation of the instrument is
in accordance with published specifications.
SECTION V, ADJUSTMENTS: contains the necessary adjustment
procedures to adjustment the instrument properly after repair.
SECTION VI, REPLACEABLE PARTS: contains the information
necessary to order parts and/or assemblies for the instrument.
SECTION VII, MANUAL BACKDATING CHANGES: contains backdating
information to make this manual compatible with earlier
equipment configurations.
SECTION VIII, SERVICE: contains schematic diagrams, block
diagrams, component location illustrations, parts lists,
circuit descriptions, and troubleshooting information to aid
in repair of the instrument.