Fluke 80i-110s Tastkopf
Hersteller:
Modell:
80i-110s
Datum:
2002
Kategorie:
Gruppe:
Beschreibung:
AC/DC Current Probe

Information

Accurate current measurements become more and more critical when troubleshooting electric, electronic, and automotive circuits. The Fluke 80i-110s AC/DC Current Probe is designed to provide you with safe, high accuracy measurements for a wide range of applications. The specially designed builtin safety features such as the 600 V rms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems. The Probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. The 80i-110s accurately reproduces current waveforms as they occur. Connect the clamp to a Fluke ScopeMeter Test Tool or other waveform recording device like a Fluke Power Harmonics Analyzer, to clearly see distorted waveforms that result from non-linear loads such as computers, adjustable speed motor drives, and electronic ballasts for fluorescent lighting. Current clamps, not specifically designed for oscilloscopes, may add distortion to the actual signal present in the system under test. This makes it difficult to get an accurate waveform measurement. The wide measurement range from 50 milliamps to 100 Amps with a high fidelity millivolt output gives you full advantage of the high resolution Oscilloscope displays. This gives you the true picture of your current situation, and allows useful measurements as low as 10 milliamps. The broad band frequency response of the Fluke 80i-110s AC/DC Current Probe from dc to 100 kHz supports a wide range of applications where the Probe can be used. The Probe can be used to track down leakage currents discharging car batteries or to measure dc currents in an Uninterruptible Power Supply (UPS), that uses a battery backup system. With its narrow jaw design, the Fluke 80i-110s makes it easy to take measurements in tight spots.

mehr

Datenblatt
Dokumenttyp:
Datenblatt
Seiten:
2
Größe:
57.74 Kbytes (59121 Bytes)
Sprache:
english
Revision:
A
Dokument-ID:
2228
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2014 11 30
MD5:
57023d37253c33590009b3f7477b5cd2
Downloads:
740