Fluke 199C Scopemeter
Hersteller:
Modell:
199C
Datum:
2002
Kategorie:
Gruppe:
Beschreibung:

Information

The Fluke I92B/196B-C7199B-C ScopeMeter test tools have three input channels that are electrically floating with respect to each other, and with respect to the power adapter input. Channel A and channel B are Oscilloscope channels with a 60/100/200 MHz bandwidth. The Meter/External Trigger channel is a combined DMM and external trigger channel with a limited (10 kHz) bandwidth. The B versions have a black&white LCD, the C versions have a color display.

mehr

Service- und Bedienungsanleitung
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
204
Größe:
10.04 Mbytes (10525904 Bytes)
Sprache:
english
Revision:
Dokument-ID:
4822 872 05391
Datum:
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
08 Februar 2016
MD5:
1a6bb03669d1d1dbdc351f0c38c4405f
Downloads:
1817

Information

1 Safety Instructions ... 1-1 1.1 Introduction ... 1-3 1.2 Safety Precautions ... 1-3 1.3 Caution and Warning Statements ... 1-3 1.4 Symbols ... 1-3 1.5 Impaired Safety ... 1-4 1.6 General S afety Information ... 1-4 2 Characteristics ... 2-1 2.1 Introduction ... 2-3 2.2 Dual Input Oscilloscope ... 2-3 2.2.1 Isolated Inputs A and B (Vertical) ... 2-3 2.2.2 Horizontal ... 2-4 2.2.3 Trigger and Delay ... 2-4 2.2.4 Automatic Connect&View Trigger ... 2-5 2.2.5 Edge Trigger ... 2-5 2.2.6 Isolated External Trigger ... 2-5 2.2.7 Video Trigger ... 2-5 2.2.8 Pulse Width Trigger ... 2-5 2.2.9 Continuous Auto Set ... 2-6 2.2.10 Automatic C apturing S cope S creens ... 2-6 2.3 Automatic Scope Measurements ... 2-6 2.3.1 General ... 2-6 2.3.2 DC Voltage (VDC) ... 2-6 2.3.3 AC Voltage (VAC) ... 2-6 2.3.4 AC+DC Voltage (True RMS) ... 2-7 2.3.5 Amperes (AMP) ... 2-7 2.3.6 Peak ... 2-8 2.3.7 Frequency (Hz) ... 2-8 2.3.8 Duty Cycle (DUTY) ... 2-8 2.3.9 Pulse Width (PULSE) ... 2-8 2.3.10 Vpwm (C versions only) ... 2-8 2.3.11 Power ... 2-9 2.3.12 Phase ... 2-9 2.3.13 Temperature (TEMP) ... 2-9 2.3.14 Decibel (dB) ... 2-9 2.4 Meter ... 2-10 2.4.1 Meter Input ... 2-10 2.4.2 Meter Functions ... 2-10 2.5 DMM Measurements on Meter Inputs ... 2-10 2.5.1 General ... 2-10 Chapter Title Page 2.5.2 Ohms (Ω) ... 2-10 2.5.3 Continuity (CONT) ... 2-10 2.5.4 Diode ... 2-11 2.5.5 Temperature (TEMP) ... 2-11 2.5.6 DC Voltage (VDC) ... 2-11 2.5.7 AC Voltage (VAC) ... 2-11 2.5.8 AC+DC Voltage (True RMS) ... 2-11 2.5.9 Amperes (AMP) ... , ... 2-12 2.6 Recorder ... 2-12 2.6.1 TrendPlot (Meter or Scope) ... 2-12 2.6.2 Scope Record ... 2-12 2.7 Zoom, Replay and Cursors ... 2-13 2.7.1 Zoom ... 2-13 2.7.2 Replay ... 2-13 2.7.3 Cursor Measurements ... 2-13 2.8 Miscellaneous ... 2-13 2.8.1 Display ... 2-13 2.8.2 Δ Power ... 2-13 2.8.3 Probe Calibration ... 2-14 2.8.4 Memory ... 2-14 2.8.5 Mechanical ... , ... 2-14 2.8.6 Optical Interface Port ... 2-14 2.9 Environmental ... 2-14 2.10 /ί Safety ... 2-15 2.11 10:1 Probe VPS200 ... 2-17 2.11.1 Safety ... 2-17 2.11.2 Electrical specifications ... 2-17 2.11.3 Environmental ... 2-17 2.12 Electromagnetic Immunity ... 2-1.8 3 Circuit Description,, ... ,.,» ... , ... , ... , ... , ... 3-1 3.1 Introduction ... 3-3 3.2 Block Diagram ... 3-3 3.3 Start-up Sequence, Operating Modes ... 3-7 3.4 Detailed Circuit Descriptions ... 3-9 3.4.1 Scope Channel A - Scope Channel B ... 3-9 3.4.2 Meter/Ext Trigger Channel ... 3-12 3.4.3 Sampling&Triggering (S-ASIC) ... 3-15 3.4.4 S-ASIC supply ... 3-19 3.4.5 ADC’s ... 3-19 3.4.6 Digital Control ... > ... 3-20 3.4.7 LCD Control ... 3-22 3.4.8 Power ... 3-23 3.4.9 Slow ADC, RS232 Serial Interface, LCD Backlight ... 3-28 4 Performance Verification ... 4-1 4.1 Introduction ... 4-3 4.2 Equipment Required For Verification ... 4-3 4.3 General Instructions ... 4-3 4.4 Operating Instructions ... 4-4 4.4.1 Resetting the test tool ... 4-4 4.4.2 Navigating through menu’s ... 4-4 4.4.3 Creating Test Tool Setup! ... 4-5 4.5 Display and Backlight Test ... 4-5 4.6 Scope Input A&B Tests ... 4-7 4.6.1 Input A&B Vertical Accuracy Test ... 4-7 4.6.2 Input A&B DC Voltage Accuracy Test ... 4-9 4.6.3 Input A&B AC Voltage Accuracy Test (LF) ... 4-11 4.6.4 Input A&B AC Coupled Lower Frequency Test ... 4-12 4.6.5 Input A and B Peak Measurements Test ... 4-13 4.6.6 Input A&B Frequency Measurement Accuracy Test ... 4-14 4.6.7 Input A&B Phase Measurements Test ... 4-15 4.6.8 Time Base Test ... 4-16 4.6.9 Input A Trigger Sensitivity Test ... 4-18 4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth Test ... 4-19 4.6.11 Input B Trigger Sensitivity Test ... 4-20 4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth Test ... 4-21 4.6.13 Video test using the Video Pattern Generator ... 4-22 4.6.14 Video test using SC600 Scope Calibration Option ... 4-25 4.7 External Trigger Level Test ... 4-27 4.8 Meter (DMM) Tests ... 4-28 4.8.1 Meter DC Voltage Accuracy Test ... 4-28 4.8.2 Meter AC Voltage Accuracy & Frequency Response Test ... 4-29 4.8.3 Continuity Function Test ... 4-30 4.8.4 Diode Test Function Test ... 4-30 4.8.5 Ohms Measurements Test ... 4-30 4.9 Probe Calibration Generator Test ... 4-32 5 Calibration Adjustment ... 5-1 5.1 General ... 5-3 5.1.1 Introduction ... 5-3 5.1.2 Calibration number and date ... 5-3 5.1.3 General Instructions ... 5-3 5.1.4 Equipment Required For Calibration ... 5-4 5.2 Calibration Procedure Steps ... 5-4 5.3 Starting the Calibration ... 5-4 5.4 Contrast Calibration Adjustment ... 5-6 5.5 Warming Up & Pre-Calibration ... 5-7 5.6 Final Calibration ... 5-8 5.6.1 Input A LF-HF Gain ... 5-8 5.6.2 Input B LF-HF Gain ... 5-9 5.6.3 input A&B LF-HF Gain ... 5-11 5.6.4 Input A&B Position ... 5-12 5.6.5 Input A&B Volt Gain ... 5-13 5.6.6 DMM Volt Gain ... 5-14 5.6.7 Input A& B, and DMM Zero ... 5-15 5.6.8 DMM Ohm Gain ... 5-16 5.6.9 Calculate Gain ... 5-17 5.7 Save Calibration Data and Exit ... 5-17 5.8 Probe Calibration ... 5-19 6 Disassembling the Test Tool ... 6-1 6.1. Introduction ... 6-3 6.2. Disassembly & Reassembly Procedures ... 6-3 6.2.1 Required Tools ... 6-3 6.2.2 Removing the Tilt Stand & Hang Strap ... 6-3 6.2.3 Replacing the Side-Strap, Changing the Side-Strap Position ... 6-3 6.2.4 Opening the Test Tool, Removing the Battery ... 6-3 6.2.5 Removing the Main PCA Unit and the Fan ... 6-5 6.2.6 Removing the Display Assembly ... 6-6 6.2.7 Replacing the LCD Window/Decaf ... 6-7 6.2.8 Removing the Keypad and Keypad Foil ... 6-7 6.2.9 Disassembling the Main PCA Unit ... 6-7 6.2.10 Reassembling the Main PCA Unit ... 6-8 6.2.11 Reassembling the Test Tool ... 6-9 7 Corrective Maintenance ... 7-1 7.1 Introduction ... 7-3 7.2 Starting Fault Finding ... 7-4 7.3 Charger Circuit ... 7-5 7.4 Starting with a Dead Test Tool ... 7-7 7.4.1 Test Tool Completely Dead ... 7-7 7.4.2 Test Tool Software Does not Run ... 7-8 7.4.3 Software Runs, Test Tool not Operative ... 7-8 7.5 Miscellaneous Functions ... 7-8 7.5.1 Display and Back Light ... 7-8 7.5.2 Fly Back Converter ... 7-10 7.5.3 Slow ADC, +3V3SADC ... 7-11 7.5.4 Keyboard ... 7-12 7.5.5 Optical Port (Serial RS232 Interface) ... 7-13 7.5.6 Channel A, Channel B Measurements ... 7-13 7.5.7 Meter Channel (Ext Trigger, Probe Cal) ... 7-15 7.5.8 Input Signal Acquisition ... 7-17 7.5.9 ADC’s ... , ... 7-19 7.5.10 Digital Control & Memory ... 7-20 7.5.11 Buzzer Circuit ... 7-20 7.5.12 RAM Test ... 7-21 7.5.13 Power ON/OFF ... 7-22 7.5.14 Battery ... 7-22 7.6 Loading Software ... 7-23 8 List of Replaceable Parts ... 8-1 8.1 Introduction ... 8-3 8.2 How to Obtain Parts ... 8-3 8.3 Service Centers ... 8-3 8.4 Final Assembly Parts ... 8-4 8.5 Main PCA Unit Parts ... 8-6 8.6 Main PCA Parts ... 8-8 8.7 Accessories ... 8-30 9 Circuit Diagrams ... 9-1 9.1 Introduction ... 9-3 9.2 Tracing signals in circuit diagrams ... 9-3 9.3 Locating Parts & Test Points ... 9-3 9.4 Diagrams ... 9-6 10 Modifications ... 10-1 10.1 General ... 10-3 10.2 Software modifications ... 10-3 10.3 Hardware modifications ... 10-3 10.4 Main PCA Unit Versions, Software Versions ... 10-4

mehr

Serviceanleitung
Dokumenttyp:
Serviceanleitung
Seiten:
206
Größe:
9.71 Mbytes (10177034 Bytes)
Sprache:
english
Revision:
Dokument-ID:
PN 4822 872 05391
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
29 November 2014
MD5:
951de7682a2c1ae7299f9ca8aa14f216
Downloads:
2881

Information

1 Safety Instructions ... 1-1 1.1 Introduction ... 1-3 1.2 Safety Precautions ... 1-3 1.3 Caution and Warning Statements ... 1-3 1.4 Symbols ... 1-3 1.5 Impaired Safety ... 1-4 1.6 General Safety Information ... 1-4 2 Characteristics ... 2-1 2.1 Introduction ... 2-3 2.2 Dual Input Oscilloscope ... 2-3 2.2.1 Isolated Inputs A and B (Vertical) ... 2-3 2.2.2 Horizontal ... 2-4 2.2.3 Trigger and Delay ... 2-4 2.2.4 Automatic Connect&View Trigger ... 2-5 2.2.5 Edge Trigger ... 2-5 2.2.6 Isolated External Trigger ... 2-5 2.2.7 Video Trigger ... 2-5 2.2.8 Pulse Width Trigger ... 2-5 2.2.9 Continuous Auto Set ... 2-6 2.2.10 Automatic Capturing Scope Screens ... 2-6 2.3 Automatic Scope Measurements ... 2-6 2.3.1 General ... 2-6 2.3.2 DC Voltage (VDC) ... 2-6 2.3.3 AC Voltage (VAC) ... 2-6 2.3.4 AC+DC Voltage (True RMS) ... 2-7 2.3.5 Amperes (AMP) ... 2-7 2.3.6 Peak ... 2-8 2.3.7 Frequency (Hz) ... 2-8 2.3.8 Duty Cycle (DUTY) ... 2-8 2.3.9 Pulse Width (PULSE) ... 2-8 2.3.10 Vpwm (C versions only) ... 2-8 2.3.11 Power ... 2-9 2.3.12 Phase ... 2-9 2.3.13 Temperature (TEMP) ... 2-9 2.3.14 Decibel (dB) ... 2-9 2.4 Meter ... 2-10 2.4.1 Meter Input ... 2-10 2.4.2 Meter Functions ... 2-10 2.5 DMM Measurements on Meter Inputs ... 2-10 2.5.1 General ... 2-10 2.5.2 Ohms (Ω) ... 2-10 2.5.3 Continuity (CONT) ... 2-10 2.5.4 Diode ... 2-11 2.5.5 Temperature (TEMP) ... 2-11 2.5.6 DC Voltage (VDC) ... 2-11 2.5.7 AC Voltage (VAC) ... 2-11 2.5.8 AC+DC Voltage (True RMS) ... 2-11 2.5.9 Amperes (AMP) ... 2-12 2.6 Recorder ... 2-12 2.6.1 TrendPlot (Meter or Scope) ... 2-12 2.6.2 Scope Record ... 2-12 2.7 Zoom, Replay and Cursors ... 2-13 2.7.1 Zoom ... 2-13 2.7.2 Replay ... 2-13 2.7.3 Cursor Measurements ... 2-13 2.8 Miscellaneous ... 2-13 2.8.1 Display ... 2-13 2.8.2 Power ... 2-13 2.8.3 Probe Calibration ... 2-14 2.8.4 Memory ... 2-14 2.8.5 Mechanical ... 2-14 2.8.6 Optical Interface Port ... 2-14 2.9 Environmental ... 2-14 2.10 Safety ... 2-15 2.11 10:1 Probe VPS200 ... 2-17 2.11.1 Safety ... 2-17 2.11.2 Electrical specifications ... 2-17 2.11.3 Environmental ... 2-17 2.12 Electromagnetic Immunity ... 2-18 3 Circuit Description ... 3-1 3.1 Introduction ... 3-3 3.2 Block Diagram ... 3-3 3.3 Start-up Sequence, Operating Modes ... 3-7 3.4 Detailed Circuit Descriptions ... 3-9 3.4.1 Scope Channel A - Scope Channel B ... 3-9 3.4.2 Meter/Ext Trigger Channel ... 3-12 3.4.3 Sampling&Triggering (S-ASIC) ... 3-15 3.4.4 S-ASIC supply ... 3-19 3.4.5 ADC’s ... 3-19 3.4.6 Digital Control ... 3-20 3.4.7 LCD Control ... 3-22 3.4.8 Power ... 3-23 3.4.9 Slow ADC, RS232 Serial Interface, LCD Backlight ... 3-28 4 Performance Verification ... 4-1 4.1 Introduction ... 4-3 4.2 Equipment Required For Verification ... 4-3 4.3 General Instructions ... 4-3 4.4 Operating Instructions ... 4-4 4.4.1 Resetting the test tool ... 4-4 4.4.2 Navigating through menu’s ... 4-4 4.4.3 Creating Test Tool Setup1 ... 4-5 4.5 Display and Backlight Test ... 4-5 4.6 Scope Input A&B Tests ... 4-7 4.6.1 Input A&B Vertical Accuracy Test ... 4-7 4.6.2 Input A&B DC Voltage Accuracy Test ... 4-9 4.6.3 Input A&B AC Voltage Accuracy Test (LF) ... 4-11 4.6.4 Input A & B AC Coupled Lower Frequency Test ... 4-12 4.6.5 Input A and B Peak Measurements Test ... 4-13 4.6.6 Input A&B Frequency Measurement Accuracy Test ... 4-14 4.6.7 Input A&B Phase Measurements Test ... 4-15 4.6.8 Time Base Test ... 4-16 4.6.9 Input A Trigger Sensitivity Test ... 4-18 4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth Test ... 4-19 4.6.11 Input B Trigger Sensitivity Test ... 4-20 4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth Test ... 4-21 4.6.13 Video test using the Video Pattern Generator ... 4-22 4.6.14 Video test using SC600 Scope Calibration Option ... 4-25 4.7 External Trigger Level Test ... 4-27 4.8 Meter (DMM) Tests ... 4-28 4.8.1 Meter DC Voltage Accuracy Test ... 4-28 4.8.2 Meter AC Voltage Accuracy & Frequency Response Test ... 4-29 4.8.3 Continuity Function Test ... 4-30 4.8.4 Diode Test Function Test ... 4-30 4.8.5 Ohms Measurements Test ... 4-30 4.9 Probe Calibration Generator Test ... 4-32 5 Calibration Adjustment ... 5-1 5.1 General ... 5-3 5.1.1 Introduction ... 5-3 5.1.2 Calibration number and date ... 5-3 5.1.3 General Instructions ... 5-3 5.1.4 Equipment Required For Calibration ... 5-4 5.2 Calibration Procedure Steps ... 5-4 5.3 Starting the Calibration ... 5-4 5.4 Contrast Calibration Adjustment ... 5-6 5.5 Warming Up & Pre-Calibration ... 5-7 5.6 Final Calibration ... 5-8 5.6.1 Input A LF-HF Gain ... 5-8 5.6.2 Input B LF-HF Gain ... 5-9 5.6.3 Input A&B LF-HF Gain ... 5-11 5.6.4 Input A&B Position ... 5-12 5.6.5 Input A&B Volt Gain ... 5-13 5.6.6 DMM Volt Gain ... 5-14 5.6.7 Input A& B, and DMM Zero ... 5-15 5.6.8 DMM Ohm Gain ... 5-16 5.6.9 Calculate Gain ... 5-17 5.7 Save Calibration Data and Exit ... 5-17 5.8 Probe Calibration ... 5-19 6 Disassembling the Test Tool ... 6-1 6.1. Introduction ... 6-3 6.2. Disassembly & Reassembly Procedures ... 6-3 6.2.1 Required Tools ... 6-3 6.2.2 Removing the Tilt Stand & Hang Strap ... 6-3 6.2.3 Replacing the Side-Strap, Changing the Side-Strap Position ... 6-3 6.2.4 Opening the Test Tool, Removing the Battery ... 6-3 6.2.5 Removing the Main PCA Unit and the Fan ... 6-5 6.2.6 Removing the Display Assembly ... 6-6 6.2.7 Replacing the LCD Window/Decal ... 6-7 6.2.8 Removing the Keypad and Keypad Foil ... 6-7 6.2.9 Disassembling the Main PCA Unit ... 6-7 6.2.10 Reassembling the Main PCA Unit ... 6-8 6.2.11 Reassembling the Test Tool ... 6-9 7 Corrective Maintenance ... 7-1 7.1 Introduction ... 7-3 7.2 Starting Fault Finding. ... 7-4 7.3 Charger Circuit ... 7-5 7.4 Starting with a Dead Test Tool ... 7-7 7.4.1 Test Tool Completely Dead ... 7-7 7.4.2 Test Tool Software Does not Run. ... 7-8 7.4.3 Software Runs, Test Tool not Operative ... 7-8 7.5 Miscellaneous Functions ... 7-8 7.5.1 Display and Back Light ... 7-8 7.5.2 Fly Back Converter ... 7-10 7.5.3 Slow ADC, +3V3SADC ... 7-11 7.5.4 Keyboard ... 7-12 7.5.5 Optical Port (Serial RS232 Interface) ... 7-13 7.5.6 Channel A, Channel B Measurements ... 7-13 7.5.7 Meter Channel (Ext Trigger, Probe Cal) ... 7-15 7.5.8 Input Signal Acquisition ... 7-17 7.5.9 ADC’s ... 7-19 7.5.10 Digital Control & Memory ... 7-20 7.5.11 Buzzer Circuit ... 7-20 7.5.12 RAM Test ... 7-21 7.5.13 Power ON/OFF ... 7-22 7.5.14 Battery ... 7-22 7.6 Loading Software ... 7-23 8 List of Replaceable Parts ... 8-1 8.1 Introduction ... 8-3 8.2 How to Obtain Parts ... 8-3 8.3 Service Centers ... 8-3 8.4 Final Assembly Parts ... 8-4 8.5 Main PCA Unit Parts ... 8-6 8.6 Main PCA Parts ... 8-8 8.7 Accessories ... 8-30 9 Circuit Diagrams ... 9-1 9.1 Introduction ... 9-3 9.2 Tracing signals in circuit diagrams ... 9-3 9.3 Locating Parts & Test Points ... 9-3 9.4 Diagrams ... 9-6 10 Modifications ... 10-1 10.1 General ... 10-3 10.2 Software modifications ... 10-3 10.3 Hardware modifications ... 10-3 10.4 Main PCA Unit Versions, Software Versions. ... 10-4

mehr

Serviceanleitung
Dokumenttyp:
Serviceanleitung
Seiten:
86
Größe:
2.16 Mbytes (2265076 Bytes)
Sprache:
english
Revision:
revised
Dokument-ID:
PN 4822 872 05391
Datum:
02 Oktober 2009
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
05 August 2017
MD5:
ec364392c8e1c6d05daeec0fbfc225e6
Downloads:
2202

Information

1 2 3 4 Title Page Safety Instructions ... 1-1 1.1 Introduction ... 1-3 1.2 Safety Precautions ... 1-3 1.3 Caution and Warning Statements ... 1-3 1.4 Symbols ... 1-3 1.5 Impaired Safety ... 1-4 1.6 General Safety Information ... 1-4 Characteristics ... 2-1 List of Replaceable Parts ... 3-1 3.1 Introduction ... 3-3 3.2 How to Obtain Parts ... 3-3 3.3 Final Assembly Parts ... 3-4 3.4 Main PCA Unit Parts ... 3-6 3.5 Accessories ... 3-8 Performance Verification ... 4-1 4.1 Introduction ... 4-3 4.2 Equipment Required For Verification ... 4-3 4.3 General Instructions ... 4-3 4.4 Operating Instructions ... 4-4 4.4.1 Resetting the test tool ... 4-4 4.4.2 Navigating through menu’s ... 4-4 4.4.3 Creating Test Tool Setup1 ... 4-5 4.5 Display and Backlight Test ... 4-5 4.6 Scope Input A&B Tests ... 4-7 4.6.1 Input A&B Vertical Accuracy Test ... 4-7 4.6.2 Input A&B DC Voltage Accuracy Test ... 4-9 4.6.3 Input A&B AC Voltage Accuracy Test (LF) ... 4-11 4.6.4 Input A & B AC Coupled Lower Frequency Test ... 4-12 4.6.5 Input A and B Peak Measurements Test ... 4-13 4.6.6 Input A&B Frequency Measurement Accuracy Test ... 4-14 4.6.7 Input A&B Phase Measurements Test ... 4-15 4.6.8 Time Base Test ... 4-16 4.6.9 Input A Trigger Sensitivity Test ... 4-17 4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth Test ... 4-19 4.6.11 Input B Trigger Sensitivity Test ... 4-20 4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth Test ... 4-21 4.6.13 Video test using the Video Pattern Generator ... 4-22 4.6.14 Video test using SC600 Scope Calibration Option ... 4-24 4.7 External Trigger Level Test ... 4-27 4.8 Meter (DMM) Tests ... 4-28 4.8.1 Meter DC Voltage Accuracy Test ... 4-28 4.8.2 Meter AC Voltage Accuracy & Frequency Response Test ... 4-29 4.8.3 Continuity Function Test ... 4-30 4.8.4 Diode Test Function Test ... 4-30 4.8.5 Ohms Measurements Test ... 4-30 4.9 Probe Calibration Generator Test ... 4-32 5 Calibration Adjustment ... 5-1 5.1 General ... 5-3 5.1.1 Introduction ... 5-3 5.1.2 Calibration number and date ... 5-3 5.1.3 General Instructions ... 5-3 5.1.4 Equipment Required For Calibration ... 5-4 5.2 Calibration Procedure Steps ... 5-4 5.3 Starting the Calibration ... 5-4 5.4 Contrast Calibration Adjustment ... 5-6 5.5 Warming Up & Pre-Calibration ... 5-7 5.6 Final Calibration ... 5-8 5.6.1 Input A LF-HF Gain ... 5-8 5.6.2 Input B LF-HF Gain ... 5-9 5.6.3 Input A&B LF-HF Gain ... 5-11 5.6.4 Input A&B Position ... 5-12 5.6.5 Input A&B Volt Gain ... 5-13 5.6.6 DMM Volt Gain ... 5-14 5.6.7 Input A& B, and DMM Zero ... 5-15 5.6.8 DMM Ohm Gain ... 5-16 5.6.9 Calculate Gain ... 5-17 5.7 Save Calibration Data and Exit ... 5-17 5.8 Probe Calibration ... 5-19 6 Disassembling the Test Tool ... 6-1 6.1. Introduction ... 6-3 6.2. Disassembly & Reassembly Procedures ... 6-3 6.2.1 Required Tools ... 6-3 6.2.2 Removing the Tilt Stand & Hang Strap ... 6-3 6.2.3 Replacing the Side-Strap, Changing the Side-Strap Position ... 6-3 6.2.4 Opening the Test Tool, Removing the Battery ... 6-3 6.2.5 Removing the Main PCA Unit and the Fan ... 6-5 6.2.6 Removing the Display Assembly ... 6-6 6.2.7 Replacing the LCD Window/Decal ... 6-7 6.2.8 Removing the Keypad and Keypad Foil ... 6-7 6.2.9 Disassembling the Main PCA Unit ... 6-7 6.2.10 Reassembling the Main PCA Unit ... 6-8 6.2.11 Reassembling the Test Tool ... 6-9

mehr

Bedienungsanleitung
Dokumenttyp:
Bedienungsanleitung
Seiten:
118
Größe:
3.25 Mbytes (3406131 Bytes)
Sprache:
english
Revision:
Dokument-ID:
4822 872 30482
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
27 Januar 2016
MD5:
f4b541932334d8acc58317a1d1bd8adc
Downloads:
1163

Information

Unpacking the Test Tool Kit ... 2 Safety Information: Read First ... 4 1 Using The Scope ... 7 Powering the Test Tool ... 7 Resetting the Test Tool ... 8 Navigating a Menu ... 9 Hiding Key Labels and Menus ... 10 Input Connections ... 10 Making Scope Connections ... 11 Displaying an Unknown Signal with Connect-and-View™ ... 12 Making Automatic Scope Measurements ... 13 Freezing the Screen ... 14 Using Average, Persistence and Glitch Capture ... 15 Acquiring Waveforms ... 18 Analyzing Waveforms ... 22 2 Using The Multimeter ... 23 Making Meter Connections ... 23 Making Multimeter Measurements ... 24 Freezing the Readings ... 27 Selecting Auto/Manual Ranges ... 27 Making Relative Measurements ... 28 3 Using The Recorder Functions ... 29 Opening the Recorder Main Menu ... 29 Plotting Measurements Over Time (TrendPlot™) ... 30 Recording Scope Waveforms In Deep Memory (Scope Record) ... 33 Analyzing a TrendPlot or Scope Record ... 36 4 Using Replay, Zoom and Cursors ... 37 Replaying the 100 Most Recent Scope Screens ... 37 Zooming in on a Waveform ... 40 Making Cursor Measurements ... 42 5 Triggering on Waveforms ... 45 Setting Trigger Level and Slope ... 46 Using Trigger Delay or Pre-trigger ... 47 Automatic Trigger Options ... 48 Triggering on Edges ... 49 Triggering on External Waveforms ... 52 Triggering on Video Signals ... 53 Triggering on Pulses ... 55 6 Using Memory, PC and Printer ... 59 Saving and Recalling ... 59 Documenting Screens ... 63 7 Tips ... 67 Using the Standard Accessories ... 67 Using the Independently Floating Isolated Inputs ... 70 Using the Tilt Stand ... 72 Resetting the Test Tool ... 72 Suppressing Key Labels and Menu’s ... 72 Changing the Information Language ... 73 Adjusting the Contrast and Brightness ... 73 Changing the Display Color ... 74 To set the display to color or Black and White, do the following: ... 74 Changing Date and Time ... 74 Saving Battery Life ... 75 Changing the Auto Set Options ... 76 8 Maintaining the Test Tool ... 77 Cleaning the Test Tool ... 77 Storing the Test Tool ... 77 Charging the Batteries ... 78 Extending Battery Operation Time ... 79 Replacing the NiMH Battery Pack BP190 ... 80 Calibrating the Voltage Probes ... 80 Displaying Calibration Information ... 82 Parts and Accessories ... 82 Troubleshooting ... 87 9 Specifications ... 89 Introduction ... 89 Dual Input Oscilloscope ... 90 Automatic Scope Measurements ... 92 Meter ... 96 DMM Measurements on Meter Inputs ... 96 Recorder ... 98 Zoom, Replay and Cursors ... 99 Miscellaneous ... 99 Environmental ... 101 Safety ... 102 10:1 Probe ... 103 Electromagnetic Immunity ... 105

mehr

Kommentare

Noch keine Kommentare, sei der erste Poster!

Kommentar hinzufügen

* Pflichtfeld
1000
Captcha Image