Brüel & Kjær 2635 Verstärker
Hersteller:
Modell:
2635
Datum:
1986
Kategorie:
Gruppe:
Beschreibung:
Conditioning Amplifier

Information

USES: * Field and laboratory measurement of vibration in terms acceleration, velocity and displacement together with piezoelectric accelerometer and voltmeter or measuring Amplifier * Field recording of vibration and other signals together with portable tape recorders and level recorders « Underwater sound measurements with hydrophone * Mechanical impedance measurements FEATURES: • Charge Input ■ 3 digit conditioning to transducer sensitivity ■ Unified output ratings for simplified system calibration « High sensitivity up to 10 V/pC ■ Built-in integrators for displacement and velocity ■ Switchable low and high frequency limits ■ Built-in test Oscillator The Charge Amplifier Type 2635 is a comprehensively equipped, charge conditioning Amplifier intended for general vibration measurements with a piezoelectric accelerometer input and for underwater sound measurements in conjunction with piezoelectric hydrophones. Its output will be routed to portable tape recorders and level recorders, electronic voltmeters, measuring amplifiers and frequency analyzers. It can be powered from internal batteries or an external DC Power supply and is equally suitable for portable use in the field and for general laboratory use. Description Reference is made to the block diagram shown in Fig.l. The 2635 is a four stage Amplifier consisting of an input amplifier, low-pass filter-ampli-fier, integrator Amplifier, and output Amplifier. An overload detector, test Oscillator and Power supply unit are also included.

mehr

Bedienungsanleitung
Dokumenttyp:
Bedienungsanleitung
Seiten:
27
Größe:
1.24 Mbytes (1296541 Bytes)
Sprache:
english
Revision:
Dokument-ID:
Datum:
1986 04 01
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
2017 06 01
MD5:
d8d4caecf7196e9bc4c4965b1b916373
Downloads:
923

Information

1. INTRODUCTION AND SPECIFICATIONS (PRODUCT DATA) ... 1 2. CONTROLS ... 5 2.1. FRONT PANEL ... 5 2.2. REAR PANEL ... 7 3. OPERATION ... 8 3.1. PRELIMINARY ... 8 Environment ... 8 Mounting ... 8 Battery installation ... 8 Grounding ... 9 3.2. MEASUREMENT PROCEDURE ... 10 Measurement Procedure using Overlay SC 0418 ... 13 3.3. USE OF INTERNAL TEST SOURCE ... 14 3.4. USE OF EXTERNAL POWER SUPPLY ... 14 Recharging Nickel Cadmium Cells ... 15 Powering the 2635 ... 15 3.5. ADJUSTMENT OF OUTPUT DC OFFSET VOLTAGE ... 16 4. CHARACTERISTICS ... 17 4.1. OVERALL GAIN ... 17 4.2. FREQUENCY AND PHASE ... 1 7 4.3. INFLUENCE OF CAPACITANCE LOADING ... 18 4.4. NOISE AND DYNAMIC RANGE ... 20 5. ACCESSORIES ... 22 5.1. MEASURING AND RECORDING INSTRUMENTATION ... 22 5.2. EXTERNAL POWER SUPPLIES ... 22 B & K Measuring Amplifiers and Frequency Analyzers ... 22 Battery Charger ZG 0113 ... 23 5.3. ACCELEROMETER CABLES AND PLUGS ... 23 6. SERVICE AND REPAIR

mehr