Agilent 4291B Analyzer
Hersteller:
Modell:
4291B
Datum:
2001
Kategorie:
Gruppe:
Beschreibung:
RF Impedance/Material Analyzer
Serviceanleitung
Dokumenttyp:
Serviceanleitung
Seiten:
350
Größe:
3.91 Mbytes (4098048 Bytes)
Sprache:
english
Revision:
4
Dokument-ID:
04291-90111
Datum:
2001 03 01
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2019 01 08
MD5:
1055193dec23c58ce631b203da20abd8
Downloads:
510

Information

This manual consists of the chapters and appendices listed below. They are divided by tabs. Performance Tests. Provides the procedures required to performance test the Analyzer. Adjustments and Correction Constants . Provides procedures for adjusting the Analyzer after repair or replacement of an assembly. Some of the adjustments update the correction constants stored in the EEPROM on the A1 CPU. The correction constants are updated by using the adjustment program (PN 04291-65003). Overall Troubleshooting. Outlines the Analyzer troubleshooting, and provides troubleshooting procedures to isolate the faulty functional group. Faulty assembly isolation procedures for each functional group are contained in the remaining trouble shooting chapters. Power supply Troubleshooting Digital Control Troubleshooting Source Troubleshooting Receiver Troubleshooting Transducer Troubleshooting Service Key Menus. Documents the functions of the menus accessed from 4 System 5, SERVICE MENU . These menus allow you to test, verify, adjust, control, and troubleshoot the analyzer. GPIB service mnemonics are included. Theory of Operation. Explains the overall operation of the Analyzer, the division into functional groups, and the operation of each functional group. Replaceable Parts. Provides part numbers and illustrations of the replaceable assemblies and miscellaneous chassis parts, together with the ordering information. Replacement Procedures. Provides procedures to disassemble portions of the Analyzer when certain assemblies have to be replaced. Post-Repair Procedures. Contains the table of related service procedures. This is a table of adjustments and verification procedures that must be performed after repair or replacement of each assembly. Appendices. Contains the manual changes information (required to make this manual compatible with earlier shipment configurations of the analyzer) and the power requirements. Messages. Contains the service related error message list.

mehr