ARP Instruments Inc. Odyssey 2813 Synthesizer
Hersteller:

Bild 1 von 1
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
ARP Instruments Inc. Odyssey 2813 hast,
kannst du die Dateien hier hochladen .
Modell:
Odyssey 2813
Datum:
1978
Kategorie:
Gruppe:
Beschreibung:
Information
Three types of Odyssey models have been produced: I) 2800,
2) 2810-2815 and 3) 2820-2823. The model and serial number
are located at the rear or bottom of the Odyssey chassis.
Except for 2800, a typical number might read: 2813-0490. For
model 2800, the first two digits of the serial number denote
the model, such as: 28490. Listed below are the board
identification numbers for each model; they will be
referenced in the service manual by model number for easy
identification.
Model Changes
The Odyssey has undergone major cosmetic and electrical
changes since its original production in 1972, however, the
functional capabilities have remained virtually unchanged.
The following are the most noticeable physical differences
among models:
MODEL 2800
Black and white face panel (some later models have black and
gold face panels).
Pitch Bend knob
No Factory installed interface jacks.
Wrap around vinyl bottom cover.
MODEL 2810-2813
Black and gold face panel.
New style power switch.
Factory installed interface jacks*
Pitch Bend knob. (Some later models have PPC.)
Wrap around vinyl bottom cover.
MODEL 2820-2823 (current model, Odyssey '78)
Black and orange face panel.
Steel chassis Leather endblocks -
PPC
The major electrical changes found in the Odyssey-II as
compared to the Odyssey-I are:
1. Uses 24db/octave filter in place of 12db/? octave.
2. Improved VCO design for better tracking# and stability.
3. Improved Power Supply regulation.
4. Improved Keyboard current source for CV generation.
5. Improved S/H memory circuit design.
Dokumenttyp:
Serviceanleitung
Seiten:
44
Größe:
11.54 Mbytes (12101282 Bytes)
Sprache:
english
Revision:
Dokument-ID:
Datum:
1978 01 01
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
2017 10 15
MD5:
4d0d54d49eb787036dcab9aabff8b04d
Downloads:
4257
Information
This service manual is divided into three major sections: A)
Circuit Descriptions, B) Trim Procedures, and C) Board Test
Points. The circuit descriptions should be consulted when a
problem is suspected in a particular area of the instrument.
The trim procedures should be used to verify calibrations or
when a component has been changed. The board test points are
a quick reference to verify circuits with suspected problems
and should be checked whenever a problem has been identified.
Kommentar hinzufügen
Nutzungsbedingungen
Diese Nutzungsbedingungen enthalten Regeln zum Posten von Kommentaren. Indem Sie einen Kommentar abgeben, erklären Sie, dass Sie diesen Regeln zustimmen:
- Obwohl der Administrator versucht, Kommentare zu moderieren, ist es unmöglich, dass jeder Kommentar zu einem bestimmten Zeitpunkt moderiert wurde.
- Sie erkennen an, dass alle Kommentare die Ansichten und Meinungen des ursprünglichen Autors und nicht die des Betreibers dieser Seite enthalten.
- Sie erklären sich damit einverstanden, keine Materialien zu veröffentlichen, die wissentlich falsch, obszön, hasserfüllt, bedrohend, belästigend oder invasiv sind.
- Der Administrator hat das Recht, jeden Kommentar ohne Angabe von Gründen zu bearbeiten, zu verschieben oder zu entfernen.
Die Nichteinhaltung dieser Regeln kann dazu führen, dass weitere Kommentare abgelehnt werden.
Diese Allgemeinen Nutzungsbedingungen können jederzeit und ohne vorherige Ankündigung geändert werden.
Kommentare