|Fluke 96B Scopemeter|
SCOPEMETER TEST TOOL FEATURES Your ScopeMeter test tool combines the capabilities of an easy-to-use digital storage Oscilloscope with the versatility of a Digital multimeter. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels. ScopeMeter Features • Rugged, dual-input Oscilloscope and high bandwidth true RMS Meter in one instrument. • Four hours of battery operation. • Allows you to measure floating from mains with the 600V insulated probes. • Optically isolated PC/Printer Interface. • Information key to access on line information on all functions. • Separate memories for storage of waveforms, instrument setups, and screens. Scope Capabilities • Triggering includes external triggering and TV line selector. • Five giga samples in recurrent mode for full resolution display of high frequency signals. (2.5 giga samples for Fluke 92B and 96B) • Continuous Auto Set for hands-free probing without adjustments to test the tool. • MIN MAX Envelope mode for recording changes in waveforms. • ScopeRecordTM allows you to capture and view waveforms spanning 120 screens 92B . Digital multimeter Capabilities • 3000 count, 5 MHz bandwidth true RMS. • Each Meter reading is accompanied by a Scope display. • Displays up to four simultaneous readings. • MIN MAX TrendPlot automatically graphs meter readings and shows minimum and maximum peak values with the actual or relative time.
Folgende Anleitungen sind hier verfügbar:
|Fluke -- 96B -- Bedienungsanleitung|
|Dateigröße:||2.16 Mbytes (2265767 Bytes)|
|Revision:||Rev. 4 1/99|
|Qualität:||Elektronisches Dokument, kein Scan, sehr gut lesbar.|
|Upload Datum:||14 Januar 2008|
|Downloads:||7587 seit dem 14 Januar 2008|
ABOUT THIS MANUAL Chapter 1 Introducing the ScopeMeter Test Tool This chapter introduces features and capabilities of your ScopeMeter test tool. Chapter 2 Getting Started This chapter provides a 15-minute demonstration intended for those who are not familiar with the ScopeMeter test tool. Chapter 3 Making Measurements This chapter explores all measurements and specifies the use of the direct Measure Menu key. At any time, you can choose over 30 measurements to get an immediate reading on the display. Chapter 4 Using the Dual Display Mode This chapter addresses the use of four Dual Display Mode Functions of the ScopeMeter test tool: , , , and . You will learn how to set up the test tool for ac and dc voltage measurements, diode tests, resistance measurements, and trend plotting. Chapter 5 contains all the Scope mode information. Chapter 5 Using the Scope Mode This chapter explores the specific use of the test tool as a digital storage Oscilloscope. You will learn how to make, store, and compare measurements. Chapter 6 Using Additional Capabilities This chapter explores the additional capabilities available with your ScopeMeter test tool. The chapter covers subjects, such as Scope measurements using the cursors, saving and recalling screens, waveforms, or setups, and making a hard copy on your Printer. Chapter 7 Measuring Examples This chapter outlines step-by-step procedures necessary to make some typical measurements. Chapter 8 User Maintenance This chapter describes the cleaning of the ScopeMeter test tool and proper use and replacement of the battery pack. Periodic Probe calibration is also covered here. Chapter 9 Appendixes A. Specifications: Operating characteristics. B. Parts and Accessories: Model numbers and replacement codes for all parts and Accessories delivered with your ScopeMeter test tool. C. PM8907 Power Adapter/ Battery Charger. D. Warranty Information and Service Centers: Warranty terms and Service Center addresses. E. Terminology: Glossary of special terms.
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.