Geräte Informationen:

Wavetek 182 Generator
Hersteller:
Wavetek
Modell: 182
Datum: 1979
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: 2MHz Function Generator
Informationen:
                                    THE MODEL 182

Wavetek model 182 Two MHz Function Generator is a
precision source of sine, triangle and square waveforms plus
dc voltage. All are front panel variable from
0.002 Hz to 2 MHz and can be externally modulated or swept
over a 1000:1 range. Output can be continuous or the
Generator can be triggered or gated by an external signal or
a front panel switch. Amplitude of the waveforms is variable
from 10V peak-to-peak into 500 down to 30 mV p-p. DC
reference of the waveforms can be offset positively or
negatively.

The main waveform output is 20V peak-to-peak maximum and can
be varied over a 30 dB range. A second waveform at 2V
peak-to-peak maximum {20 dB attenuation) and a TTL level
square at Generator frequency are auxiliary outputs, inputs
are provided for external voltage controlled Generator
frequency (VCG) and for triggering and gating the Generator.

Folgende Anleitungen sind hier verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung Wavetek-11104-Manual-Page-1-Picture
Seitenanzahl: 33
Dateigröße: 1.39 Mbytes (1462724 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer:
Datum: 01 Juni 1979
Qualität: Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
MD5: da542a1b60769eea2490cb46f4f0fe43
Downloads: 63 seit dem 12 August 2018
Informationen:
SECTION 1 GENERAL DESCRIPTION

1.1	THE MODEL
182 ... 1-1

1.2
SPECIFICATIONS ... 1-1

1.2.1
Versatiiity ... 1-1

1.2.2	Frequency
Precision ... 1-1

1.2.3	Amplitude
Precision ... 1-1

1.2.4	Waveform
Characteristics ... 1-2

1.2.5
General ... 1-2

SECTION 2 INSTALLATION

2.1	MECHANICAL
INSTALLATION ... 2-1

2.2	ELECTRICAL INSTALLATION ... ,	2-1

2.2.1	Power
Connection ... 2-1

2.2.2	Signal Connections ... 
 ... 2-1

2.3	ELECTRICAL ACCEPTANCE
CHECK ... 2-1

2.4	CHANGING THE OUTPUT
IMPEDANCE ... 2-2

SECTION 3 OPERATION

3.1	CONTROLS AND
CONNECTIONS ... 3-1

3.2
OPERATION ... 3-2

3.2.1	Signal Termination ... 
 ... 3-2

3.2.2	Manual Function Generator Operation ... 
 ... 3-2

3.2.3	Voltage Controlled Function Generator
Operation ... 3-2

3.2.4
Waveforms ... 3-3

SECTION 4 CIRCUIT DESCRIPTION

4.1	FUNCTIONAL SLOCK DIAGRAM
ANALYSIS ... 4-1

SECTION 5 ALIGNMENT

5.1	FACTORY
REPAIR ... 5-1

5.2	REQUIRED TEST
EQUIPMENT ... 5-1

5.3	REMOVING Generator
COVERS ... 5-1

5.4
ALIGNMENT ... ; ... 5-1

SECTION 6 TROUBLESHOOTING

6.1	FACTORY REPAIR ... 
 ... 6-1

6.2	TROUBLESHOOTING
TABLES ... 6-1

6.3	TROUBLESHOOTING INDIVIDUAL
COMPONENTS ... 6-1

6.3.1
Transistor ... 6-1

6.3.2
Diode ... 6-1

6.3.3	Operational
Amplifier ... 6-1

6.3.4	FET
Transistor ... 6-1

6.3.5
Capacitor ... 6-1

6.4 GENERAL
INSTRUCTIONS ... 6-2

SECTION 7 PARTS AND SCHEMATICS

7.1
DRAWINGS ... 7-1

7.2	ORDERING
PARTS ... 7-1

7.3
ADDENDA ... 7-1
Wavetek-11104-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics