Geräte Informationen:

Datex-Ohmeda S/5 Compact Critical Care Monitor Überwachungssystem
Modell: S/5 Compact Critical Care Monitor
Datum: 2006
Kategorie: Medizinische und biomedizinische Geräte
Gruppe: Überwachungssystem
Beschreibung: Compact Critical Care Monitor
                                    Datex-Ohmeda monitors build up a freely configurable modular
system. The architecture is designed
to enable different module combinations so that the user is
able to get the desirable parameter and
feature set. This modular approach makes it possible to add
new features when they are needed.

The modular design makes the system flexible and easy to
upgrade. In addition to patient parameter
modularity and easy upgrades, the monitor can be upgraded to
anesthesia record keeping, wired
and wireless networking and memory card operation.
Additionally, external devices can be interfaced
to the monitor with interface modules.

Folgende Anleitungen sind hier verfügbar:

Dokumenttyp: Serviceanleitung DatexOhmeda-10246-Manual-Page-1-Picture
Seitenanzahl: 320
Dateigröße: 5.03 Mbytes (5273233 Bytes)
Sprache: Englisch
Dokument-ID/Nummer: M1021567
Datum: 01 März 2006
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: e182bd371cb2740c7784d669b40a6144
Downloads: 122 seit dem 09 Februar 2018
Technical Reference Manual

This Technical Reference Manual is intended for service
personnel and engineers who will install,
service and maintain Datex-Ohmeda S/5 Compact Anesthesia
Monitors running the software
license L-CANE05 or L-CANE05A and S/5 Compact Critical Care
Monitors running the software
license L-CICU05 or L-CICU05A. As the monitor setup may
vary, some functions described may not be
available in the monitor you are using.
 The order code for the entire printed manual is M1021567.
The manual includes Technical
Reference Manual Slots and every slot has an individual
document number.
 Part I gives the reader an overview of the monitor. It
contains the information needed to install,
interface and troubleshoot the monitors. Instructions for
functional check and planned
maintenance are also included. Read the manual through and
make sure that you understand
the procedures described before the installation of the
monitor. To avoid risks concerning safety
or health, strictly observe the warning indications. If you
need any assistance concerning the
installation, please do not hesitate to contact your
authorized distributor.
 Part II contains detailed descriptions of each component of
the S/5 CAM, CCCM Monitor,
For information of parameter modules, Remote Controller and
Device Interfacing Solution refer to the
“S/5 E-Modules, Technical Reference Manual”. Service check
for each of these products is included
in these slots.

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics