Mirage Communication Equipment KP-2 / 10 Meter: Verstärker
Hersteller:
Kein Bild verfügbar!
Vielleicht kannst du ein Bild für
Mirage Communication Equipment KP-2 / 10 Meter:
hochladen ?
Wenn du andere Handbücher für ein
Mirage Communication Equipment KP-2 / 10 Meter: hast,
kannst du die Dateien hier hochladen .
Modell:
KP-2 / 10 Meter:
Datum:
1996
Kategorie:
Gruppe:
Beschreibung:
MAST-MOUNT GaAsFET PRE-AMPLIFIER
Information
This in-line GaAs-FET receive pre-amp provides high gain and
low noise
amplification for weak receive signals. The KP-2 also has
automatic RF-
switching, which disengages the pre-amp any time it detects a
transmission signal being emitted by the Transceiver.
The KP-2 pre-amp has an attenuator built into the circuit
which can be
selected by changing the position of a switch on the
internal circuit board.
This switch is set in the LOW level gain position at the
factory. This has
been included to prevent Receiver overloading and subsequent
intermodulation distortion that can come from very strong
signals.
Dokumenttyp:
Bedienungsanleitung
Seiten:
5
Größe:
77.35 Kbytes (79205 Bytes)
Sprache:
english
Revision:
A
Dokument-ID:
Datum:
1996 01 01
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2017 08 19
MD5:
6438fa5e75844294b8e961b71d3cf28f
Downloads:
1607