Combinova EFM 200 Level Meter
Hersteller:
Bild 1 von 1
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
Combinova EFM 200 hast,
kannst du die Dateien hier hochladen .
Modell:
EFM 200
Datum:
Kategorie:
Gruppe:
Beschreibung:
Electric Field Meter
Information
Electric Field Meter 200 is a professional instrument to
measure electrostatic and alternating electric fields. The
instrument has a wide dynamic range with automatic gain setting.
Electrostatic field measurements are made using a built-in
field mill Probe. Alternating electric fields are measured
using a special Probe. Two different frequency ranges are
available; ELF (5-2,000Hz) and VLF (2-400kHz). The
instrument is powered by a built-in
chargeable sealed lead-acid battery. The built-in
communication Interface (RS232) can be
used to transfer stored results to a printer or a computer.
The options available with the instrument are:
»
Fiberoptic Interface kit for remote control operation.
»
Probe to check instrument calibration.
The electronics in the instrument comprise analog
amplifiers, a microcomputer with communication peripherals
and an alphanumerical LCD-display with back light. A
built-in clock and calendar is used in the data logging
measurement modes.
Dokumenttyp:
Bedienungsanleitung
Seiten:
64
Größe:
829.60 Kbytes (849506 Bytes)
Sprache:
english
Revision:
2A
Dokument-ID:
Datum:
Qualität:
Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
2017 08 03
MD5:
bd17a95e2fbb721e6ff1d7fa00631fc7
Downloads:
575
Information
Section 1 - INTRODUCTION
Electric Field Measurements with EFM 200
The Instrument - EFM 200
Using the EFM 200
Combinova AB - The Company Behind the Product
Section 2 - UNPACKING AND INSPECTION
Unpacking
Inspection
Checking the Battery Voltage
Section 3 - OPERATING INSTRUCTIONS
General Operation
Measurements
Data Retrieve
Print
Check Mode
Parameters
Calibration Test
Battery Charging
Section 4 - TECHNICAL DESCRIPTION
General
Field Measurement Principles
Printing with the EFM 200
Fiber Optic Remote Operation
Fiber Adapter 10
Section 5 - SPECIFICATIONS
Section 6 - ERROR CODES
Instrument Errors
Measurement Errors
Data Retrieve Errors
Print Errors