Telecommunications Techniques Corporation T-BERD T1 Sonstiges
Hersteller:
Kein Bild verfügbar!
Vielleicht kannst du ein Bild für
Telecommunications Techniques Corporation T-BERD T1
hochladen ?
Wenn du andere Handbücher für ein
Telecommunications Techniques Corporation T-BERD T1 hast,
kannst du die Dateien hier hochladen .
Modell:
T-BERD T1
Datum:
1994
Kategorie:
Gruppe:
Beschreibung:
Repeater Extender
Information
The T-BERD T1 Repeater Extender is a hand-held circuit card
extender packaged in a rugged plastic case, which provides
easy test access toTl signals at span repeater housings. The
T-BERD T1 Repeater Extender is designed to work in
conjunction with a T-Berd 107
107A, 209,209A, or 211
T-Carrier Analyzer to perform out-of-service testing or
monitoring of T1 signals along repeatered spans.
Through the use of switches and jacks, the T-BERD T1
Repeater Extender enables you to monitor T1 signals at
repeater inputs and outputs without disrupting the simplex
current. The T-BERD T1 Repeater Extender also further
sectionalizes span lines by performing signal loopbacks at
the repeater and by terminating repeater outputs.
1.3 STANDARD FEATURES
Four test access jacks permit monitoring of test signals at
the input and output of T1 repeaters. These jacks also
provide direct access to the T1 span for Time Domain
Reflectometer (TDR) and DC testing.
SIGNAL and CURRENT path switches enable the T-BERD T1
Repeater Extender to perform signal and current loopbacks at
span repeater housings.
The TRANSMIT switch terminates the SIDE 1 or SIDE 2 output
of a repeater with a 100-ohm load and allows test signal
insertion at any span repeater location without affecting
the simplex current.
SIDE 1 and SIDE 2 CURRENT SENSE TEST POINTS provide access
for an external volt-ohmmeter.
Dokumenttyp:
Bedienungsanleitung
Seiten:
42
Größe:
4.15 Mbytes (4353502 Bytes)
Sprache:
english
Revision:
B
Dokument-ID:
ML11357
Datum:
1994 02 01
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
2017 01 15
MD5:
4e23d12cf252a7a238b853e053d9c4d6
Downloads:
513
Information
GENERAL
INFORMATION ... 1-1
1.1
INTRODUCTION ... 1-1
1.2 INSTRUMENT
OVERVIEW ... 1-1
1.3 STANDARD
FEATURES ... 1-1
INSTRUMENT CHECKOUT AND MAINTENANCE ... 2-1
2.1
UNPACKING ... 2-1
2.2 EQUIPMENT
INCLUDED ... 2-1
2.3 WARNINGS AND
CAUTIONS ... 2-1
2.4 WARRANTY
POLICY ... 2-2
2.5 IN-WARRANTY SERVICE
... 2-2
2.6 OUT-OF-WARRANTY
SERVICE ... 2-3
2.7 EQUIPMENT RETURN INSTRUCTIONS ... 2-3
INSTRUMENT
DESCRIPTION ... 3-1
3.1
INTRODUCTION ... 3-1
3.2 TEST
SETUP ... 3-1
3.3 TEST
CONNECTIONS ... 3-6
OPERATION ... 4-1
4.1
INTRODUCTION ... 4-1
4.2 MONITORING SIGNALS AT THE REPEATER ... 4-1
4.3 SIGNAL LOOPBACKS AT SPAN REPEATERS ... 4-4
4.4 TERMINATING REPEATER OUTPUTS ... 4-7
4.5 TRANSMITTING TEST SIGNALS FROM
SPAN
REPEATERS ... 4-10
4.6 LOOPING SIMPLEX CURRENT AT SPAN REPEATERS
... 4-12
4.7 MEASURING SIMPLEX CURRENT ... 4-14
4.8 PERFORMING TDR AND DC TESTS ... 4-17
SPECIFICATIONS ... 5-1
5.1 GENERAL
SPECIFICATIONS ... 5-1
5.2 INPUT
SPECIFICATIONS ... 5-1
5.3 REPEATER
TYPES ... 5-2
5.4
GROUNDING ... 5-2
3-1 T-BERD T1 REPEATER EXTENDER ... 3-2
3-2 TEST SWITCH T1 TESTING MODES ... 3-3
3-3 TRANSMIT SWITCH CONFIGURATIONS ... 3-5
3-4 SIGNAL PATH SWITCH CONFIGURATIONS ... 3-7
3-5 CURRENT PATH SWITCH CONFIGURATIONS ... 3-8
4-1 MONITORING SIGNALS
... 4-2
4-2 SIGNAL
LOOPBACKS ... 4-6
4-3 TERMINATING REPEATER OUTPUTS ... 4-8
4-4 TRANSMITTING TEST
SIGNALS ... 4-11
4-5 LOOPING SIMPLEX
CURRENT ... 4-13
4-6 MEASURING SIMPLEX CURRENT ... 4-16
4-7 TDR MEASUREMENTS
TEST ... 4-18