Geräte Informationen:

Stoelting 100F Gefrierschrank
Hersteller:
Stoelting
Modell: 100F
Datum:
Kategorie: Haushaltselektronik
Gruppe: Gefrierschrank
Beschreibung: Slush Freezers
Informationen:
                                    Models 100C, 100F, and 2217G freezers are gravity fed. The
freezers are equipped with fully automatic controls to
provide a uniform product. The freezers are designed to
operate with most neutral bases and concentrated flavors.

Folgende Anleitungen sind hier verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung Stoelting-8332-Manual-Page-1-Picture
Seitenanzahl: 52
Dateigröße: 597.06 Kbytes (611389 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 513554
Datum:
Qualität: Elektronisches Dokument, kein Scan, sehr gut lesbar.
Upload Datum:
MD5: 3952f9554aed4ae0b3cee3e0d38d3502
Downloads: 542 seit dem 07 Januar 2017
Informationen:
SECTION 1
INTRODUCTION ... 1

1.1
Descriptions ... 1

1.2
Specifications ... 1

SECTION 2	INSTALLATION
INSTRUCTIONS ... 3

2.1	Safety
Precautions ... 3

2.2	Shipment and
Transit ... 3

2.3	Freezer
Installation ... 3

2.4	Adjusting Cup
Dispensers ... 7

SECTION 3	INITIAL SET-UP AND OPERATION
 ... 9

3.1	Operator's Safety
Precautions ... 9

3.2	Operating Controls and
Indicators ... 9

3.3	Draining the Freezer For Disassembling and
Cleaning ... 10

3.4	Disassembly and Cleaning of Freezer
Parts ... 10

3.5	Sanitizing The Freezers and Freezer
Parts ... 15

3.6	Assembly of
Freezer ... 15

3.7	Mix
Information ... 17

3.8	Freeze Down and
Operation ... 17

3.9	Dispensing
Product ... 17

3.10	Routine Cleaning
 ... 17

3.11	Preventative
Maintenance ... 17

3.12	Extended
Storage ... 18

SECTION 4	DECALS AND
TAGS ... 21

4.1	How to Order Decals and
Tags ... 21

SECTION 5	REFRIGERATION COMPONENTS AND
ADJUSTMENTS ... 23

5.1	Refrigeration System
 ... 23

5.2
Compressor ... 23

5.3
Condenser ... 23

SECTION 6	ELECTRICAL SYSTEM OPERATION AND
ADJUSTMENTS ... 27

6.1	24 Hour
Timer ... 27

6.2	Electronic Torque
Control ... 27

SECTION 7	MAJOR COMPONENT REMOVAL AND
INSTALLATION ... 29

7.1	Introduction
 ... 29

7.2	Condenser Fan
Removal ... 29

7.3	Drive Motor Removal
 ... 29

7.4	Compressor Removal
 ... 29

7.5	Compressor Installation
 ... 30

7.6	Drive Motor Installation
 ... 31

7.7	Condenser Fan Installation
 ... 31

SECTION 8	TROUBLESHOOTING
 ... 33

8.1	Compressor Run Capacitor Open, Shorted or
Blown ... 34

8.2	Compressor Relay Defective or Burned Out
 ... 34

8.3	Compressor Starts and Runs, But Short Cycles On Overload
Protector ... 34

8.4	Compressor Runs
Continuously ... 34

8.5	Unit
Noisy ... 34

8.6	Compressor Will Not
Start ... 34

8.7	Compressor Will Not Start - Hums But Trips On Overload
Protector ... 35

8.8	Compressor Starts, But Does Not Switch Off of Start
Winding ... 35
8.9	Compressor Start Capacitor Open, Shorted or
Blown ... 35

8.10	Freezer Will Not
Start ... 35

8.11	Drive Motor Overload Trips (Freezer Shuts Down When
Running)
 ... 35

8.12	Compressor Will Not Run, But Drive Motor
Runs ... 35

8.13	Product Dispenses
Incorrectly ... 35

8.14	Product is Too Thin
 ... 36

8.15	Agitator Does Not
Rotate ... 36

8.16	No Ice Crystals On Initial Freeze
Down ... 36

8.17	Excessive Ice Crystals Above Divider Plate
 ... 36

8.18	Spigot Leaking or
Stuck ... 36

SECTION 9 REPLACEMENT PARTS AND REFERENCE
DRAWINGS ... 37

9.1	How to Order
Parts ... 37

9.2	Spigot Assembly
Parts ... 37

9.3	Model 100C Parts
List ... 39

9.4	Model 100F Parts
List ... 41

9.5	Model 2217G Parts
List ... 43
Stoelting-8332-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics