Krohn-Hite Corporation 5100A Generator
Hersteller:
Bild 1 von 2
Bild 2 von 2
Wenn du irgendwelche anderen Fotos oder Handbücher für ein
Krohn-Hite Corporation 5100A hast,
kannst du die Dateien hier hochladen .
Modell:
5100A
Datum:
1973
Kategorie:
Gruppe:
Beschreibung:
VOLTAGE CONTROLLED FUNCTION GENERATOR
Information
The Krohn-Hite Model 5100A Function Generator provides sine,
square, triangle, positive ramp and negative ramp functions
over the frequency range of O.OOZ Hz to 3 MHz. An auxiliary
fixed amplitude square wave is provided, independent of the
other functions, for synchronous gating, blanking, etc.
Control of symmetry is provided for all functions, and
allows for pulse or sawtooth operation. The maximum output
amplitude is 20 volts p-p open circuit or 10 volts across 50
ohms. The output attenuator has a range of 40 dB, and has a
vernier capable of an additional attenuation of 30 dB.
Externally generated signals may be used to synchronize the
frequency of the Generator, to F-M the Generator output
about a center frequency, or to sweep the Generator
frequency over a range of at least 1000:1.
The output signal may be offset by up to ±5 volts open
circuit by means of a front panel control.
Dokumenttyp:
Service- und Bedienungsanleitung
Seiten:
32
Größe:
1.91 Mbytes (2005215 Bytes)
Sprache:
english
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
2015 09 06
MD5:
0a11923ea0a7e797245ffd6f216c27f0
Downloads:
917
Information
OPERATING AND MAINTENANCE MANUAL
1 ' GENERAL· DESCRIPTION . .
...
1
2
OPERATION ...
5
3 INCOMING INSPECTION AND CHECKOUT
... 10
4 CIRCUIT DESCRIPTION
...
13
5 MAINTENANCE .
...
19
6 CALIBRATION
... ...
2 2